Blood Collecton Systems

Multi-adapter for S-Monovette, Luer – 33 mm – 100 pieces

Serum, standard print.
Format: 92 x 16.5 mm, sterile.

Product description:

for infusion and transfusion therapy
Luer-Lock positive connector, Luer-Lock negative connector, protective and screw cap, latex-free

Product data:

- Ø 1.5 x 2.75 mm
- 150 cm LL

Pyrogen-free, with venting and hanging device. Labelled and equipped according to A.M.G., made of glass, sterile inside.

Standard pressure.
No use of Westergren pipettes required.
Format: 130 x 8.5 mm, sterile.

- for ozone therapy (a transfusion set for ozone-oxygen therapy with a steel spike must be used here, e.g. MEG 121505 or MEG 121506) - for reinfusion
- for phlebotomy
- incl. bottle holder

With the S-Monovette® you can choose between aspiration or vacuum technique. The S-Monovette® blood collection system gives you free choice of collection method. You can collect blood using the aspiration or vacuum principle, or combine the advantages of both techniques. For multiple sampling, venepuncture and the first blood draw can be carried out with the cannula attached using the aspiration technique. Thanks to the high transparency of the screw cap, you benefit from very good puncture control. The S-Monovettes can then be filled according to the vacuum principle, provided the venous conditions allow. The cannula remains in the vein while the S-Monovettes are changed, enabling drip-free multiple sampling.

Combination options: For blood collection from Luer connections, the S-Monovette® can be combined with the Multi-Adapter. For blood collection with a winged cannula, the Multifly® cannula with pre-assembled adapter, which connects directly to the S-Monovette®, is available.

EDTA is used as an anticoagulant for almost all haematological examinations. EDTA is provided as a solution at a concentration of 1.2–2 mg EDTA/ml blood in the S-Monovette® and in the sample tubes. Dilution due to the liquid EDTA solution is a maximum of 1%. The anticoagulant effect of EDTA is not impaired by drying out due to storage.

Standard print.
Format: 66 x 11.5 mm, potassium EDTA, sterile.

Original-Perfusor® line, standard type – PVC tubing
For all syringe pumps used in infusion therapy up to a pressure of < 2 bar.

- minimised dead space volume
- Luer lock connector
- latex- and DEHP-free

The portable NAVI-60 vein finder works contact-free and gently using NIR technology (near-infrared light). The device supports medical staff in vein localisation in addition to visual assessment and palpation.

The MedCaptain vein finder makes the course of superficial veins visible in real time using NIR infrared light. The projection onto the skin surface maps the venous network precisely and also provides indications of vein depth. At the press of a button, the vein projection can be displayed in colour or inverted. The VeinNavi NAVI-60 can be used across many medical specialties as an aid for venepuncture. Whether in infusion therapy, paediatrics, vascular surgery or oncology, the VeinNavi-60 makes it easier to find the right site for puncture, injection or blood sampling.

Thanks to the high-resolution display, occluded or bleeding veins as well as narrowings and curves become more visible. Optical distortions are reduced by the NAVI-60 technology to show vein distribution more accurately. In depth mode, the position of the vein is displayed on the skin surface using green bars. A single light bar corresponds to a depth of approx. 0 to 2 mm, two bars to a depth of 2 to 4 mm.

VeinNavi can be used in studies and training programmes to illustrate the course of veins, as well as in difficult clinical situations. In particular, when veins are difficult to palpate or very small—for example under an infant’s “baby fat”—or when venous access is limited by medication and infusions, the VeinNavi-60 delivers fast, reliable results and provides reassurance for patients and healthcare professionals.

Product details:

5 colours and inverted colour mode for each colour (white, green, red, blue, light violet)
4 brightness levels
Depth mode, vein depth range: 0 - 2 mm / 2 - 4 mm / ≥ 4 mm
Image sizes: 360*192 pixels / 360*288 pixels / 720*576 pixels
Light source type: near-infrared light (NIR), 10 - 25 lumens
Wavelength: 850 nm with dual light source
Optimal focus position: 210 ± 30 mm
Imaging depth of field: > 30 mm
Power supply: lithium-ion battery, charging cable with mains adapter
Operating time: > 2.5 hours
Charging time: 4 hours

Scope of delivery:

1 MedCaptain NAVI-60 VeinNavi infrared vein finder
1 mains adapter
1 charging cable
User manual with accuracy test card

DEVICE TRAINING/INSTRUCTION AVAILABLE!

6-bevel sharpened tip for an injection that is barely noticeable

Thin-wall technology for improved medication flow

Special silicone surface treatment for enhanced injection comfort

Audible “click” for a secure fit

Fits all standard injection pens and is available in 4, 6 and 8 mm lengths

With the S-Monovette® you can choose between aspiration or vacuum technique. The S-Monovette® blood collection system gives you complete freedom in selecting the sampling method. You can collect blood using the aspiration or vacuum principle, or combine the advantages of both techniques. For multiple sampling, venepuncture and the initial blood draw can be performed with the needle attached using the aspiration technique. Thanks to the high transparency of the screw cap, you benefit from very good puncture control. The S-Monovettes can then, if the venous conditions allow, be filled using the vacuum principle. The needle remains in the vein while changing the S-Monovettes, enabling drip-free multiple sampling.

Combination options: For blood collection from Luer connections, the S-Monovette® can be combined with the Multi-Adapter. For blood collection with a winged needle, the Multifly® needle with completed adapter is available and can be connected directly to the S-Monovette®.

Citrate serves as an anticoagulant for performing the erythrocyte sedimentation rate (ESR) test and is pre-dosed as a 0.106 molar solution. When the S-Monovettes or sample tubes are filled completely, the specified mixing ratio of 1:5 (1 part citrate solution + 4 parts blood) is maintained exactly.

With the S-Monovette® you can choose between aspiration or vacuum technique. The S-Monovette® blood collection system gives you complete freedom to select the collection method. You can collect blood using the aspiration or vacuum principle, or combine the advantages of both techniques. For multiple sampling, venepuncture and the first blood draw can be performed with the needle attached using the aspiration technique. Thanks to the high transparency of the screw cap, you benefit from excellent control of the puncture. The S-Monovettes can then be filled using the vacuum principle, provided the venous conditions allow. The needle remains in the vein while changing the S-Monovettes, enabling drip-free multiple sampling.

Combination options: For blood collection from Luer connections, the S-Monovette® can be combined with the Multi-Adapter. For blood collection with a winged needle, the Multifly® needle with pre-assembled adapter is available and can be connected directly to the S-Monovette®.

Citrate is used as an anticoagulant for all coagulation tests and is pre-dosed as a 0.106 molar solution. When the S-Monovettes or sample tubes are filled completely, the specified mixing ratio of 1:10 (1 part citrate solution + 9 parts blood) is maintained exactly. The citrate plasma obtained is suitable for all coagulation tests.