Skip to Content

Laboratory Supplies

Numerous different devices and consumables are used in laboratories. Especially in medical diagnostics and therapies, laboratory tests are an essential part to detect and treat diseases at an early stage. To ensure that the daily routine of the practice can take place according to regulations, a medical laboratory must be fully equipped at all times. In our online store, we offer you everything you need in terms of laboratory equipment and consumables for clinics and medical practices. From the technical equipment of the laboratory to laboratory-specific consumables, you will find everything you need in terms of equipment and laboratory accessories.
AMPRI Pulse hourglass with clip 15 seconds
Pulse timer with metal case and clip

Features:
Length: 65 mm
Time: 15 seconds for measuring pulse rate
()
2.62 € 2.62 EUR
MEDDAX Swab inside sterile with blue lid
Individually sterile packed! Take a swab, insert the swab with cap, label the sticker, ready for dispatch!

Without agar, cotton fabric tip, sterile inside, with label.

Wooden stick 150 mm, dimensions: Ø 11 x 180 mm
()
8.57 € 8.57 EUR
SARSTEDT UriSet 24, incl. stabiliser and white Urine-Monovette
The complete set for standardised and patient-friendly 24-hour urine collection consisting of: - Collection bottle: 3,000 ml capacity, ergonomic handle, large opening diameter of 80 mm and transparent viewing strip for optimal reading of the fill level - Collection and transfer beaker: the integrated 500 ml collection beaker enables patient-friendly collection as well as transfer of the urine from the collection bottle into the transport tube - Stabiliser: the hydrochloric acid (9 ml 20%) is pre-dosed in a glass bottle with safety dropper. - Transport container: 10 ml urine Monovette is sent to the doctor or laboratory. The urine collection bottle remains with the patient and is disposed of by them. For secure patient identification, a self-adhesive label is included with the urine Monovette.
()
5.78 € 5.78 EUR
SERVOPRAX Inoculation loops gamma sterile with needle
Gamma-sterilised inoculation loops with needle
20 pieces each, sterile in a pouch; no flaming required; no aerosol formation; precisely defined loop size; made of inert plastic; with a needle on one end; ideal for inoculating culture media.
()
From 1.93 € 0.0 EUR
SARSTEDT UriSet 24, without stabiliser with white Urine-Monovette
The complete set for standardised and patient-friendly 24-hour urine collection, consisting of: - Collection bottle: 3,000 ml capacity, ergonomic handle, large opening diameter of 80 mm and a transparent viewing strip for optimal reading of the fill level - Collection and transfer cup: the integrated 500 ml collection cup enables patient-friendly collection as well as transfer of the urine from the collection bottle into the transport tube - Transport container: 10 ml urine Monovette is sent to the doctor or to the laboratory. The urine collection bottle remains with the patient and is disposed of by the patient. For secure patient identification, the urine Monovette is supplied with a self-adhesive label.
()
4.63 € 4.63 EUR
BD Vacutainer SST Advance tubes, gold
BD Vacutainer SST II Advance tubes for serum analysis. PET plastic, integrated separator gel, clot activator, Hemogard™ closure, gold, paper label.
()
From 23.16 € 0.0 EUR
SERVOPRAX Measuring cup graduated, Low form, Polypropylene
• Complies with ISO 7056-1981 (E) and BS 5404 Part 1.
• The innovative polypropylene material provides very high transparency.
• Autoclavable for max. 20 minutes at 120 °C. Continuous use up to 100 °C.
• The permanently moulded-in graduation is wipe-resistant.
• Excellent chemical properties.

Product data:

Material: Polypropylene

25 ml = Outer Ø 35 mm / H: 50 mm / Wall thickness Ø 1.5 mm / Tolerance ± 10% / Graduation 1 ml

50 ml = Outer Ø 42 mm / H: 60 mm / Wall thickness Ø 1.5 mm / Tolerance ± 10% / Graduation 2 ml

100 ml = Outer Ø 52 mm / H: 70 mm / Wall thickness Ø 1.5 mm / Tolerance ± 10% / Graduation 5 ml

250 ml = Outer Ø 70 mm / H: 95 mm / Wall thickness Ø 2 mm / Tolerance ± 10% / Graduation 10 ml

500 ml = Outer Ø 90 mm / H: 120 mm / Wall thickness Ø 2 mm / Tolerance ± 10% / Graduation 10 ml

1000 ml = Outer Ø 110 mm / H: 150 mm / Wall thickness Ø 2 mm / Tolerance ± 10% / Graduation 20 ml

2000 ml = Outer Ø 135 mm / H: 185 mm / Wall thickness Ø 2 mm / Tolerance ± 10% / Graduation 50 ml

3000 ml = Outer Ø 160 mm / H: 200 mm / Wall thickness Ø 2.5 mm / Tolerance ± 10% / Graduation 500 ml

5000 ml = Outer Ø 190 mm / H: 230 mm / Wall thickness Ø 2.5 mm / Tolerance ± 10% / Graduation 500 ml
()
From 2.63 € 0.0 EUR
SERVOPRAX Specimen storage screw jars
Specimen storage screw jars
These transparent polystyrene storage containers are ideal for the safe storage of specimens. With a wide opening and a tight screw lid, they accommodate all specimens and can be transported safely.
()
From 97.46 € 0.0 EUR
SERVOPRAX servoPLATE Culture media
Contents:

4 x 5 sterile sealed plates, optimum results with clear delineation.
()
From 16.24 € 0.0 EUR
SERVOPRAX Sample containers for Hitachi
Sample containers for Hitachi
Material: polystyrene
()
6.72 € 6.72 EUR
From 12.45 € 0.0 EUR
BBRAUN Closing cones Combi red Lock-inner/outer
- ideal for securely sealing all female and male Luer connectors
- sterile closure for all types of connectors on the infusion set
- secure closure of pre-filled syringes
- made of PE
- latex-, PVC- and DEHP-free
()
6.55 € 6.55 EUR
MEDDAX DIAGNOSTIX D-Dimer Test
A reliable test when thrombosis or pulmonary embolism is suspected, for example

Excessively high D-dimer levels may indicate deep vein thrombosis in the leg, pulmonary embolism, excessive blood clotting (disseminated intravascular coagulation), malignant tumours, leukaemias or severe liver cirrhosis. Low values have no clinical significance.


Detailed test data:
The limit of detection is 500 ng/ml.
Read-out exactly after 10 minutes.
Storage at 2–30 °C.
Individual single-dose vials for the buffer solution are included in the kit, preventing carry-over and providing sufficient reagent for each cassette.

Important note:

In patients with acute chest pain and shortness of breath, an elevated D-dimer level and the absence of typical cardiac marker changes indicate pulmonary embolism.

D-dimer is produced when the protein fibrin, which is crucial for plasma coagulation, is broken down. When blood coagulation begins in the body, the concentration of D-dimer in the blood increases. This test enables the exclusion of pulmonary embolism (PE), deep vein thrombosis (DVT) or disseminated intravascular coagulation (DIC). With D-dimer, it should be noted that the diagnostic value of the test decreases with increasing patient age. Scientists have developed a formula to adjust the cut-off: “Age in years x 10 micrograms per litre”; however, for values above 500 micrograms per litre, further diagnostic work-up is always necessary.

ATTENTION: Sale only to medical device resellers, doctors and public authorities! Test for professional use only!
()
45.40 € 45.4 EUR
VITLAB Measuring cup, PP, raised blue scale
Highly transparent, with an easy-to-read, raised blue embossed scale and a sturdy, easy-grip handle. To protect the embossing, cleaning up to max. 60 °C is recommended. Conditionally autoclavable at 121 °C (2 bar) in accordance with DIN EN 285. Food-safe product in accordance with Regulation (EC) No 10/2011.

Volume (ml) Graduation (ml)
50 2
100 2
250 5
500 10
1000 20
2000 50
3000 50
5000 100
()
From 2.90 € 0.0 EUR
MEDDAX DIAGNOSTIX Troponin I
The Troponin I test from MEDDAX is used for the rapid, qualitative detection of human cardiac troponin I in whole blood, serum or plasma. Results can be read after just 10 minutes. It is ideally suited for the diagnosis of myocardial infarction.
After damage to the heart muscle, troponin I is released into the blood after 4–6 hours. Troponin I levels remain elevated for 6–10 days. The test’s limit of detection is 0.5 ng/ml. The test is manufactured directly in Germany and is continuously monitored by renowned testing laboratories. This ensures consistently high quality.

Contents: individually sealed test cassettes, pipettes, buffer solution dropper bottle. Now with individual single-dose bottles for the buffer solution, eliminating contamination.

Product data:

Storage: dry at 2–30 °C
Reading time: approx. 10 min
Limit of detection: 0.5 ng/ml

WARNING: Sale only to medical device resellers, physicians and authorities! Test for professional use only!
()
48.90 € 48.9 EUR
SIEMENS Clinitek Status Thermal printer paper rolls
Thermal printer paper (5 rolls)
for Clinitek 50, 100, 500, Clinitek Status, Clinitek Advantus, DCA and INNOVANCE PFA-200
()
51.75 € 51.75 EUR
MEDDAX DIAGNOSTIX CrP HS (10/60) Rapid test
RAPID TEST FOR SEMI-QUANTITATIVE AND SELECTIVE DETECTION OF CRP IN WHOLE BLOOD, SERUM OR PLASMA

For the detection and monitoring of inflammation, e.g. caused by bacterial infections or arteriosclerosis.

For professional in vitro diagnostics.

Result after 5 minutes. Storage at 2–30 °C.

For testing with whole blood, you only need a sample collection container (for venous whole blood) or a lancet (for whole blood samples from the fingertip).

ATTENTION: Sale only to medical device resellers, physicians and public authorities! Test for professional use only!
()
20.80 € 20.8 EUR
Vertrag widerrufen