First Aid Equipment

High-performance portable suction pump, specially developed for ambulance, transport and emergency use. Thanks to its versatility, the suction pump can also be used in ambulances and hospitals.

V7 plus B suction pump
High-performance portable suction pump, specially developed for ambulance, transport and emergency use. Thanks to its versatility, the suction pump can also be used in ambulances, hospitals, home care therapies and other emergency services.

• Suction capacity up to 30 L/min

• Robust and ergonomic ABS housing

• Rear mounting system for wall bracket, tested to withstand accelerations and decelerations of 10g in longitudinal, transverse and vertical directions (European standard UNE-EN-1789: 2000)

• Piston pump, oil-free and maintenance-free

• Rotary control for vacuum regulation

• Pressure gauge display 0–760 mmHg

• Waterproof ON/OFF switch with protective device

• Battery status can be checked via LED indicator lights

• Polycarbonate suction canister (1 L) with overflow valve, autoclavable up to 121 °C

• Bacterial filter, Yankauer suction tip and suction tubing included

Max. flow rate: 30 L/min

Max. vacuum: 630 mmHg

Weight: 4.2 kg

Dimensions: 250 x 395 x 160 mm (H x W x D)

Power supply: 12 Volt DC / 85 W (built-in battery)

Wall bracket: 10G-tested vehicle bracket (European standard UNE-EN-1789: 2000), including 12V power supply

Servosport® Medispray Cooling Spray
For fast, targeted cooling for bruises and injuries, ideal for the first-aid kit, CFC-free propellant.
With a high menthol and peppermint content.
Also suitable for use as an air freshener!

The latest evolution of the SOF Tourniquet sets the standard for pre-hospital tourniquets. Its innovative design incorporates feedback from users and their specific experience, focusing on the features most important to them—resulting in a tourniquet that is stronger, faster and easier than ever before.

Updates:

Easy-pull action for smooth, rapid self-application

Custom-developed materials for increased strength and durability

Reduced weight for improved portability

A newly designed compression strap (4 cm wide) maximises pressure during application. The new material slides through the robust buckle for fast, trouble-free application and minimises pressure loss over time after application.
New robust fastening
Indicator: triangle embroidered into the compression strap below the windlass for visual confirmation that you have pulled the strap all the way out
Reinforced clip for securing the windlass

The new SOF® Tactical Tourniquet-W is the result of two years of development. It is lighter, more effective and faster than other tourniquets and can be used in any situation.

As robust as the proven predecessor model, but equipped with a 4 cm wide constriction strap for greater effectiveness when applying the tourniquet, even in the most difficult situations. Another innovation is the quick-release buckle, which allows the SOF® TT-W to be applied in seconds.

All benefits at a glance:

4 cm wide for higher pressure and comfort

Innovative, robust quick-release buckle

More compact packed size, yet extremely durable (aluminium)

Can be operated with one hand in any position

25% lighter than the predecessor model

NSN: 6515-01-587-9943 - black

Practical first-aid set for the new family arrival in a pink zip pouch. The pouch, approx. 190 x 130 x 40 mm, is made of coated nylon fabric and can be wiped clean with a damp cloth; it is robust, lightweight and space-saving.
This makes it the ideal companion throughout the baby stage.

Contents:
- SÖHNGEN dressing materials for babies
- Wound and hand cleansing wipes
- Fever thermometer
- Baby nail scissors
- Teething ring
- Dummy
- Dentinox gel
- Skin protection cream
- Baby tummy oil
- Nasal aspirator

Compiled in accordance with DIN for equipping motorcycles, for fitters/technicians and other individuals. Contents: DIN 13167 first-aid contents with aluderm® dressing pack, aluderm® aluplast adhesive wound dressing, adhesive tape, triangular bandage, SIRIUS® emergency blanket, protective gloves, first-aid scissors.

Zip fastener pouch
- Dimensions: 240 x 170 mm
- Material: coated nylon fabric, orange
- With screen printing
- Robust, light, soft and flexible, requires little space

An essential first-aid kit for mountain biking and all other cycling activities. Contains aluderm® dressings, aluderm® quick dressing, aluderm®-aluplast wound plasters, SÖHNGEN® Plast plaster strips, elastic bandage, Ideal bandage, scissors, wound disinfectant. aluderm® with aluminium-vapourised wound dressing does not stick to the wound and can support skin regeneration and healing. Nylon zip bag, 135 x 100 x 50 mm, orange. The adjustable Velcro straps allow the bag to be easily attached to handlebars, a luggage rack or bracing bars.

First aid for leisure and outdoor activities is a topic people prefer not to think about and is therefore far too often neglected. Leisure time should be fun and enjoyable – who wants to consider that something might happen – and time-consuming searching and gathering is simply a nuisance. They take up very little space in the small luggage needed for a leisure activity or for work and are always within easy reach. Practical zip pouch made of coated nylon fabric, colour: orange. Pouch size 210 x 140 mm. Robust, lightweight, soft and flexible, requires little space. Printed with pictogram and labelling.

Replantation bag for transporting amputated limbs. This medical device consists of two bags placed inside each other. Both are resealable. The amputated part is placed in the inner bag, where it can be cooled using instant cold packs in the outer bag.

Sizes

Hand set: approx. 300 x 250 mm, 2 instant cold packs
Arm set: approx. 700 x 250 mm, 4 instant cold packs
Leg set: approx. 1100 x 400 mm, 4 instant cold packs

Soft, pliable soft bag with first-aid supplies. Your personal travel first-aid kit: everything important is always with you and cannot be forgotten. Still fits into your luggage, backpack, hiking bag or sports bag.
Contents: SIRIUS® emergency blanket, aluderm® compresses, aluderm® quick dressings, aluderm® alufinger, aluderm®-aluplast wound dressing plasters, SÖHNGEN® Silk adhesive tape strips, wound disinfectant, WS Ideal bandage, WS elastic bandage, scissors, tweezers, protective gloves. Made of synthetic fibre fabric, 230 x 115 x 55 mm, two-colour, two carry loops, zip closure, flap with press-stud, attachment loops.

The Match 3 impresses with its extremely robust quality and many practical features. The blades have rounded tips and are fitted with plastic applications. This ensures maximum protection for the patient when clothing needs to be cut on the body.
The large, ergonomically shaped finger holes provide the necessary grip and also allow the user to cut through materials that require greater force.

Cuts leather, textiles, thin metal, seat belts and shatters glass.

Dimensions: 247 x 105 x 18 mm
Cutting length: 100 mm
Material: steel/nylon

Scope of delivery:
- 1 pair of scissors
- 1 wall/vehicle holder

Unique and rethinking the holster concept – the CARGO pocket holster brings order to the thigh pocket of service trousers.

For deployment areas with special requirements, the CARGO is also available in the CARGO TACTICAL version in completely black.

Pens, pupil torch, disposable gloves and more can be stored in the holster’s elastic loops and are within reach in seconds.

For items such as trauma shears, the CARGO is equipped with a puncture-resistant slip-in compartment.

Infinitely adjustable in length, it can be adapted to the pocket depth of the respective trousers in just a few easy steps. This prevents the holster from disappearing into the “depths of the thigh pocket”, while still remaining largely invisible from the outside. Using the elastic pull loop at the top, the entire holster can be easily pulled back out of the thigh pocket.


Features:
- 8 elastic loops in various sizes, inside, including:
- 1 with puncture-resistant slip-in compartment for e.g.
trauma shears
- 2 large elastic loops on the outside on the back
- 2 small elastic loops on the outside on the sides
- elastic pull loop for removing the holster
- 2 wide, reinforced hook-and-loop strips for adjusting the holster height
- 2 hook-and-loop strips for reducing the height of the inner compartments


Scope of delivery:
Holster without additional accessories


Specifications:
Colours: grey, black
Size (W x H x D): 12.5 x 14 x 5.5 cm
Max. size (W x H x D): 17 x 19 x 5.5 cm
Weight: 150 g
Material: 150D polyester

For marking searched rooms or corridors.
The 30 cm-long CHECKER STRAP can be quickly attached to almost any type of door handle thanks to the cord stopper, without the need for complicated knotting, and offers a 100% secure hold even during positive-pressure ventilation.
The 12 mm wide strap, with its signal yellow colour and 8 mm continuous reflective stripe, is clearly visible even in smoke-filled rooms.

Pack size: 5 door marking straps per pack

The CHECKER door marking straps are ideal for use with the CHECKER POUCH cuff!

Details on use are compiled in the Service section:
Use of CHECKER POUCH

Scope of delivery:
without any additional accessories!

Specifications:
- Colour: yellow/silver
- Size: 30 cm x 1.2 cm
- Weight: 0.02 kg
- Material: 95% polypropylene, 5% nylon

With every reach, a door marking strap ready to hand, intuitive and reliable – that’s what defines the CHECKER POUCH sleeve.

A total of ten marking straps fit into the CHECKER POUCH. Each strap is neatly held in elastic loops inside the sleeve, and only the easy-to-grip cord stoppers are on the outside.

Each strap can be removed easily, individually by pulling on the cord stopper – in any order and in any pulling direction.

The sleeve itself is either worn on the arm over the protective jacket with its long Velcro fastener for a precise fit, or it can be attached with a carabiner to a belt or equipment loop.

The CHECKER POUCH sleeve is the ideal aid for door marking, allowing the marking straps to be removed easily even while wearing protective gloves!

Features:
- 10 slots for CHECKER STRAP
door marking straps (9861-2508)
- internal elastic loops for stowing
the marking straps and protection against
the straps getting tangled with each other
- 2 long Velcro strips for a precise fit on the arm
- 2 metal eyelets for attachment with a carabiner
to belt or jacket

Scope of delivery:
Sleeve, empty and without any other accessories shown


Specifications:
- Colour: blue
- Size: 42 x 11 x 2 cm
- Weight: 0.16 kg
- Material: 370G TEC Fire Retardant

The CT HMS Screw Karabiner is a pear-shaped aluminium carabiner with a classic screwgate.

Suitable and approved for integration into the belay chain for rescue and self-rescue,
e.g. when using an Italian hitch belay (HMS).

Features:

- Breaking load
- major axis: 23 kN
- minor axis: 10 kN
- gate open: 9 kN
- Gate opening: 23 mm
- Catch-Free locking system
- certified to EN 362


Scope of delivery:
Carabiner without any additional accessories or illustrated items


Specifications:
- Colour: natural
- Size: 11 x 7 cm
- Weight: 0.07 kg
- Material: aluminium

Two problems, one solution: the loss-proof transport of handheld radios and right-angle torches repeatedly poses a challenge for breathing apparatus wearers.

Everyone knows it: lean forward briefly and the radio falls to the ground. During operations, a loss of communication can have fatal consequences.
The HYBRID holster ensures secure transport and optimum accessibility of the devices on the shoulder strap of the breathing apparatus, but also on a belt or duty belt.

Depending on requirements and the operational situation, both device types can be quickly stowed in the holster.

The two elastic loops offer flexible space for wooden wedges or marking pens.

Scope of delivery:
Holster without any additional accessories shown

Specifications:
- Colour: blue
- Size: 19.5 x 9 x 5.5 cm
- Weight: 0.11 kg
- Material: 370G TEC Fire Retardant

This is ensured by the 4 mm thick, padded compartment with hook-and-loop fastener. A plastic ring on the bottom of the compartment prevents the TEE-LIGHT torch from switching on automatically. Double elastic straps on the sides provide space for spare batteries as well as for pens up to a maximum length of 13 cm.

The holster can be attached to a duty belt, belt or vest using a 25 mm wide loop secured with a metal press stud.

Features:
- Main compartment for torch
- 2 elastic loops
- Belt loop with press-stud security

Scope of delivery:
Holster without any additional accessories or illustrated accessories

Specifications:
- Colour: black
- Size: 16 x 5 x 4 cm
- Weight: approx. 60 g
- Material: 100% polyester, not flame-retardant

The MARKER PEN marking pen is ideal for marking and labelling on almost all surfaces!

The most common fields of use in the fire service are:

- Breathing apparatus operations
e.g. marking searched rooms or areas

- Technical assistance operations
e.g. marking cut and application points for hydraulic rescue equipment, or cordoned-off areas such as airbag zones, etc.

The MARKER PEN writes on virtually all surfaces:
metal, wood, plastic, concrete, rubber, glass and paper.
No matter whether the surfaces are wet, oily, rusty, smooth or rough.

The two different colours (red and yellow) make it possible, for example, to distinguish the markings of two breathing apparatus teams or to delineate cutting and cordoned-off areas.

Optimum operating temperature range: -45°C to +65°C


Scope of delivery:
MARKER PEN in yellow or red, without any additional accessories or illustrated accessories


Specifications:
- available colours: red, yellow
- size: 14 x 2 cm
- weight: 0.04 kg