Emergency

Colour: Black
Made from polyester

Pressure regulator with 2 outlets (shown here with ZGA-DIN coupling and 9/16" outlet).
1st outlet: Flow control (0 / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 9 / 12 / 15 / 25 l/min). 9/16" hose barb outlet. Outlet pressure 2.5 bar.

2nd outlet: ZGA-DIN coupling or 3/8" connection, e.g. for ventilators. Outlet pressure 4.5 bar. Cylinder contents pressure gauge in low-profile design with rubber protective ring.


The pressure regulators distributed by us have had a lifetime of 10 years since 2016 and are MAINTENANCE-FREE within this period!! This means that no further maintenance costs are incurred during this time. According to the manufacturer, neither STK nor MTK is required.

The following applies to all our pressure regulators: the pressure gauge is well protected, low-profile, compact and easy to read, and can be rotated 360°; optimal readability under all conditions. The 360° swivel flow outlet 9/16" enables flexible connection in all directions. Self-centring flow adjustment handwheel with 2 display windows on all pressure regulators with variable flow; uninterrupted flow even between the individual switching stages.

1 piece

Oxygen outlet point with ZGA-DIN plug for DIN socket or DIN coupling. For ambulances and hospital use. Flow selector (0 / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 9 / 12 / 15 / 25 l/min). Inlet: ZGA-DIN plug, outlet: 9/16".

The pressure reducers distributed by us have had a lifetime of 10 years since 2016 and are MAINTENANCE-FREE within this period!! This means no further maintenance costs are incurred during this time. According to the manufacturer, neither STK nor MTK is required.

The following applies to all our pressure reducers: the pressure gauge is well protected, flat, compact, easy to read and can be rotated through 360°; optimum readability under all conditions. The 360° swivelling 9/16" flow outlet enables flexible connection in any direction. Self-centring flow adjustment handwheel with 2 display windows on all pressure reducers with variable flow; uninterrupted flow even between the individual switching stages.

1 piece

Pressure reducer as a distribution valve up to 120 l/min. Special pressure reducer as a distribution valve in the ambulance. Approved up to 300 bar, max. flow 120 l/min.

Outlet pressure:
4.5 bar, inlet G ¾” to DIN 477, outlet connection 3/8” male thread. Cylinder contents pressure gauge in flat design with rubber protective ring. Available in various versions with variable connection studs (long or short version).



The pressure reducers distributed by us have, since 2016, a lifetime of 10 years and are MAINTENANCE-FREE during this period!! This means that no further maintenance costs are incurred during this time. According to the manufacturer, neither STK nor MTK is required.

The following applies to all our pressure reducers: the pressure gauge is well protected, flat, compact, easy to read and rotatable through 360°; optimum readability under all conditions. The 360° swivel flow outlet 9/16” allows flexible connection in any direction. Self-centring flow adjustment handwheel with 2 display windows on all pressure reducers with variable flow; uninterrupted flow even between the individual switching stages.

1 piece

Pressure reducer as a distribution manifold up to 120 l/min. Special pressure reducer as a distribution manifold in ambulances. Approved up to 300 bar, max. flow rate 120 l/min, outlet pressure 4.5 bar, inlet G ¾” to DIN 477, outlet connection ZGA DIN coupling. Cylinder contents pressure gauge in a low-profile design with rubber protective ring. Available in various versions with variable connection bolts (long or short version).

The pressure reducers distributed by us have had a lifetime of 10 years since 2016 and are MAINTENANCE-FREE within this period!! This means that no further maintenance costs are incurred during this time. According to the manufacturer, neither STK nor MTK is required.

The following applies to all our pressure reducers: the pressure gauge is well protected, low-profile, compact and easy to read, and can be rotated 360°; optimal readability under all conditions. The 360° swivel flow outlet 9/16” enables flexible connection in all directions. Self-centring flow adjustment handwheel with 2 display windows on all pressure reducers with variable flow; uninterrupted flow also between the individual switching stages.

1 piece

Compact pressure regulator with adjustable flow settings (0 / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 9 / 12 / 15 / 25 l/min) and self-centring handwheel with 2 flow windows. Inlet G ¾" to DIN 477, outlet 9/16". Cylinder contents gauge in a low-profile, compact design; cylinder contents gauge rotatable through 360°. 360° swivel flow outlet enables flexible use in all applications. Constant flow, even if the handwheel is held in an intermediate position.

The pressure regulators distributed by us have had a 10-year lifetime since 2016 and are MAINTENANCE-FREE within this period!! This means there are no further maintenance costs during this time. According to the manufacturer, neither an STK nor an MTK is required.

The following applies to all our pressure regulators: the gauge is well protected, low-profile, compact and easy to read and can be rotated through 360°; optimum readability under all conditions. The 360° swivel flow outlet 9/16" enables flexible connection in all directions. Self-centring flow adjustment handwheel with 2 display windows on all pressure regulators with variable flow; uninterrupted flow even between the individual switching steps.

- Length approx. 12 cm
- Ø approx. 4 cm
- Weight approx. 650 g

1 piece

Compact pressure regulator with adjustable flow settings (0 / 0.25 / 0.5 / 0.75 / 1 / 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 l/min) and self-centring handwheel with 2 flow windows. Inlet G ¾” to DIN 477, outlet 9/16”. Cylinder contents pressure gauge in a flat, compact design; cylinder contents pressure gauge rotatable 360°. 360° swivelling flow outlet enables flexible use in all applications. Constant flow, even if the handwheel is held in an intermediate position. Available in various versions with variable connection pin (long or short version).

The pressure regulators distributed by us have had a lifetime of 10 years since 2016 and are MAINTENANCE-FREE within this period!! This means there are no additional maintenance costs during this time. According to the manufacturer, neither STK nor MTK is required.

For all our pressure regulators: the pressure gauge is well protected, flat, compact and easy to read and rotatable 360°; optimum readability under all conditions. The 360° swivelling 9/16” flow outlet enables flexible connection in all directions. Self-centring flow adjustment handwheel with 2 display windows on all pressure regulators with variable flow; uninterrupted flow even between the individual switching stages.

- Length approx. 12 cm
- Ø approx. 4 cm
- Weight approx. 650 g
- MRI-compatible

1 piece

Carrying bag, universal mains cable and car charging cable. This device has adjustable power levels from 1 to 5, which corresponds approximately to the output in litres, and a weight of 2.2 kg.

Trolley, universal mains cable and car charging cable.
This device has adjustable output levels triggered from 1 to 6, which roughly correspond to the output in litres, and in continuous flow output levels from 0.5 to 2 litres, as well as a weight of 4.6 kg.

Carrying bag, universal mains cable and car charging cable. This device has adjustable power levels from 1 to 5, which correspond approximately to the output in litres, and a weight of 2.5 kg.

Colour: White

The wall bracket is a sturdy hot-dip galvanised sheet steel construction with chain safety catch and drilled holes for wall mounting.

Quick overview

Height in cm - 9.0 cm
Certification to - CE EN ISO 20347:2012 O2 CI WR FO SRC
Gender - women, men
Season - spring, autumn, summer, winter
Antistatic - yes
Fastening - classic lacing
Upper material - leather
Puncture resistance - no
ESD - no
Protective toe cap - no
Height - low
Area of use - police
Colour - black
Waterproof - waterproof thanks to Gore-Tex
Weight per shoe - approx. 494 grams
Weight per pair - approx. 988 grams

Upper material

- The duty shoe is made from high-quality aniline leather. It is especially soft and comfortable to wear.
- The leather is hydrophobically treated, making it extremely waterproof.
- Pigments in the upper leather reflect the sun’s rays. This prevents your work shoes from heating up unnecessarily.
- The shoes are available in black and are therefore suitable for the office.

Inner lining, footbed and insoles

- Thanks to the three-layer GORE-TEX® membrane, liquids cannot penetrate your low shoes. At the same time, the material lets your feet “breathe”.
- So you can enjoy wearing your HAIX shoes indoors and outdoors, they are lined with an abrasion-resistant lining material.
- The anatomically shaped insole absorbs moisture immediately and dries quickly.
- In addition, the non-woven insole absorbs moisture that develops in the duty shoe during use.
- The cushioning wedge made of PU foam cushions your steps when walking, helping to protect your back and joints.

Sole

- The slip-resistant sole of the work shoes gives you a secure grip – even in wet conditions and on ice.
- The tread profile is abrasion-resistant, preventing your office shoes from wearing out quickly.
- The outsole provides excellent insulation against cold.
- Your HAIX duty shoes are resistant to oil and petrol.
- The rubber/TPU outsole is non-marking: you won’t leave dark streaks on light floors or white tiles.

The Airpower C1 is ideal as an office shoe: it is elegant and extremely comfortable to wear. The cushioning wedge made of PU foam cushions your steps when walking, helping to protect your back and joints. Order the multifunctional low shoe from HAIX now!

Quick overview

Height in cm - 8.5 cm
Area of use - Occupational safety, emergency services
Certification according to - CE EN ISO 20345:2011 S2 HRO HI CI SRC
Gender - Women, Men
Season - Spring, Autumn, Summer, Winter
Antistatic - yes
Toe cap - yes
Fastening - Hook-and-loop fastening
Upper material - Leather
Puncture resistance - no
ESD - no
Waterproof - not waterproof
Height - low
Safety class - S2
Colour - black
Weight per shoe - approx. 675 grams
Weight per pair - approx. 1350 grams

- Hook-and-loop fastening, easy and straightforward to shorten;
- Padded, wide toe protection cap;
- Increased chemical protection;
- Highly slip-resistant, non-marking sole;
- Insole with very good moisture absorption and quick drying, washable, replaceable;
- Breathable inner lining;
- Pigments in the leather reflect sunlight and prevent excessive heating inside the shoe;
- The abrasion-resistant sole provides heat and cold insulation;
- Oil- and petrol-resistant sole;
- PU cushioning for excellent walking comfort;
- Even with orthopaedic adaptation, the shoe remains compliant with the standard

Quick overview


Height in cm - 14.0 cm
Area of use - Occupational safety, emergency services
Certification according to - CE EN ISO 20345:2011 S3 HRO HI CI SRC
Gender - Women, men
Season - Spring, autumn, summer, winter
Antistatic - yes
Puncture resistance - yes
Protective toe cap - yes
Fastening - Hook-and-loop fastening
Height - ankle-high
Upper material - leather
ESD - no
Waterproof - not waterproof
Safety class - S3
Colour - black
Weight per shoe - approx. 770 grams
Weight per pair - approx. 1540 grams

The Nevada Mid is a lightweight and particularly comfortable work shoe that meets all the requirements of an S3 boot: it offers excellent protection against wet conditions, heat and cold, has a stable, slip-resistant sole and a wide protective toe cap. The ankle-high shoe is ideal for work in a workshop or factory as well as for emergency responders on duty. Thanks to the three-part hook-and-loop fastening, it can be put on and taken off especially quickly.

Upper material

- The safety shoes are made from high-quality, particularly hard-wearing bull leather.
- The two-millimetre-thick leather has been hydrophobically treated, i.e. impregnated to be water-repellent, and is breathable. Sweat can escape through the shoe.
- Colour pigments in the leather reflect sunlight and prevent the black shoes from heating up in summer. Your feet stay pleasantly cool.
- A rubber toe cap protects the leather in the toe area against abrasion.
- The so-called Velcro lock prevents you from accidentally unthreading the upper hook-and-loop fastening.
- A reflective strand, a decorative trim, is attached in the heel area. This makes you clearly visible, for example during a night-time emergency response.

Lining, insoles, protective toe cap

- The inside of your HAIX work shoes is lined with an abrasion-resistant, breathable lining. It wicks sweat to the outside so your feet stay comfortably dry.
- The non-woven insole, which connects the outsole and upper, also absorbs moisture inside the shoe.
- The anatomically shaped insoles further increase wearing comfort. Your steps are cushioned and your joints are relieved.
- The insoles dry particularly quickly. You can also replace and wash them.
- The protective toe cap is extra wide and well padded, so you won’t feel it.
- A lightweight, puncture-resistant midsole ensures you won’t injure yourself on sharp objects such as nails or broken glass.

Sole

- The work shoe has a robust, abrasion-resistant rubber/PU outsole with high rolling comfort.
- The deep tread is very well suited to both road and off-road use. You have secure grip on any surface.
- The large, bevelled contact area guarantees sure footing – even on uneven terrain.
- The sole provides excellent insulation against heat and cold. You will feel comfortable in the shoes in any weather.
- In addition, the outsole is resistant to oil, petrol and heat up to 300°C.

The Nevada Mid is the ideal safety shoe for tradespeople and emergency responders. It is comfortable, has a slip-resistant sole with deep tread, and insulates against heat and cold. See for yourself the benefits of the lightweight HAIX duty boot.

First aid for open chest wounds
Halo Chest Seal features:

Excellent adhesion thanks to hydrophilic gel coating

No reduction in adhesion due to blood and sweat

No valve that could become blocked

Large tab for easy removal

Can also be used to secure other wound dressings

No adhesive residue after removal

Notches on all 4 corners for easy opening

Packaging can be resealed when not in use

For use at temperatures from -40 °C up to +65 °C

Usable for 3 years from date of manufacture

Latex-free

This item is supplied in a pack of 2. The price also refers to the twin pack.

NSN: 6510-01-581-0553