Compresses

Cuticell Contact sterile primary wound dressing by BSN.

Cutimed alginate dressing made from natural seaweed by BSN.

Atrauman is an ointment dressing that effectively supports wound healing in all phases and, thanks to the specific benefits of the material components used, ensures atraumatic wound care.

Application:
For general wound care, in particular to keep wound surfaces and wound edges supple, e.g. for abrasions or lacerations as well as burns or scalds; in plastic and cosmetic surgery, for nail extractions, phimosis operations, etc.; to cover donor and recipient sites in skin grafting; also ideal in dermatology and for patients with sensitive skin or sensitivity to medicines.

Characteristics:
The thin, soft mesh tulle made of hydrophobic polyester fibres with a smooth surface structure inhibits tissue ingrowth into the dressing and thus counteracts the tendency to adhere to the wound.

The non-adherent effect of Atrauman is additionally supported by the ointment impregnation, allowing gentle dressing changes.

Atrauman keeps wound surfaces and wound edges supple and protects the wound from drying out. It helps prevent problematic scar contractures.

The ointment base itself is gas-permeable and permeable to exudate. This ensures sufficient air supply to the wound and rapid transport of excess exudate. For absorption of exudate, an absorbent pad should be applied over Atrauman.

The ointment base contains no added petroleum jelly or other paraffins. There are no ointment residues that are difficult to remove. The condition of the wound can be assessed reliably and cleaning is made easier.

The ointment base contains no active substances and is non-sensitising. Therapeutically active substances can be added in a targeted and safe manner at the physician’s discretion.

Atrauman is an ointment dressing that effectively supports wound healing in all phases and, thanks to the specific benefits of the material components used, ensures atraumatic wound care.

Application:
For general wound treatment, in particular to keep wound surfaces and wound edges supple, e.g. for abrasions or lacerations as well as burns or scalds; in plastic and cosmetic surgery, after nail extractions, phimosis operations, etc.; for covering donor and recipient sites in skin grafting; also ideal in dermatology and for patients with sensitive skin and/or sensitivities to medicines.

Characteristics:
The thin, soft mesh tulle made of hydrophobic polyester fibres with a smooth surface structure inhibits the ingrowth of tissue into the dressing and thus counteracts the tendency to adhere to the wound.

The non-adherent effect of Atrauman is further supported by the ointment impregnation, enabling a gentle dressing change.

Atrauman keeps wound surfaces and wound edges supple and protects the wound from drying out. It helps prevent troublesome scar contractures.

The ointment base itself is gas-permeable and permeable to exudate. This ensures sufficient air access to the wound as well as rapid transport of excess exudate. For exudate absorption, an absorbent dressing should be applied over Atrauman.

The ointment base contains no added petroleum jelly or other paraffins. There are no ointment residues that are difficult to remove. The condition of the wound can be assessed reliably and cleansing is made easier.

The ointment base is free from active ingredients and non-sensitising. Therapeutically effective substances can be added in a targeted and safe manner at the physician’s discretion.

Atrauman is an ointment-impregnated dressing that effectively supports wound healing in all phases and, thanks to the specific advantages of the material components used, ensures atraumatic wound care.

Application:
For general wound management, in particular to keep wound surfaces and wound edges supple, e.g. for abrasions or lacerations as well as burns or scalds; in plastic and cosmetic surgery, after nail extractions, phimosis operations, etc.; for covering donor and recipient sites in skin grafting; also ideal in dermatology and for patients with sensitive skin and those sensitive to medicines.

Characteristics:
The thin, soft mesh tulle made of hydrophobic polyester fibres with a smooth surface structure inhibits tissue ingrowth into the dressing and thus counteracts the tendency to adhere to the wound.

The non-adherent effect of Atrauman is additionally supported by the ointment impregnation, enabling gentle dressing changes.

Atrauman keeps wound surfaces and wound edges supple and protects the wound from drying out. It helps prevent troublesome scar contractures.

The ointment base itself is gas-permeable and permeable to exudate. This ensures adequate air supply to the wound and rapid transport of excess exudate. For absorption of exudate, an absorbent pad should be applied over Atrauman.

The ointment base contains no added petroleum jelly or other paraffins. There are no ointment residues that are difficult to remove. The condition of the wound can be assessed reliably and cleansing is made easier.

The ointment base contains no active ingredients and is non-sensitising. Therapeutically effective substances can be added in a targeted and safe manner at the physician’s discretion.

ES dressings are 17-thread gauze swabs made of absorbent gauze in accordance with EN 14079-VM 17 with folded-in cut edges (= ES). As a classic dressing material with a wide range of applications, they are indispensable in wound care.

Application:
For general wound care, in particular for initial treatment of dirty, infected and heavily exuding wounds; for use as swabs and as dressings for minor surgical procedures.

Characteristics:
ES dressings offer good absorbency, are air-permeable, soft and pliable.

Thanks to the folded-in cut edges, ES dressings can be unfolded several times and used in larger formats without any troublesome frayed edges.

Demand-oriented dressing and pack sizes always allow economical use.

Gauze swabs with a woven-in Telatrast X-ray detectable contrast thread are available under the name Telacomp.

Grassolind ointment dressings are made from a wide-mesh cotton fabric impregnated with an active-ingredient-free, skin-neutral ointment base. They are therefore particularly suitable for wound treatment in dermatology and for patients with sensitive skin or sensitivity to medicines.

Application:
For general wound treatment, in particular to keep wound surfaces and wound edges supple, e.g. for extensive abrasions or lacerations as well as burns or scalds; in plastic and cosmetic surgery, for nail extractions, phimosis operations, etc.; to cover the donor site in skin grafting and to fix split-thickness skin grafts; also ideal in dermatology and for patients with sensitive skin or sensitivity to medicines.

Characteristics:
Branolind keeps wound surfaces and wound edges supple in all phases of wound healing and protects the wound from drying out. Granulation and re-epithelialisation are promoted, and troublesome scar contractures are effectively prevented.

Branolind does not adhere to the wound. Dressing changes are painless. The wound can remain undisturbed.

The wide-mesh gauze tulle allows oxygen to reach the wound and ensures good ventilation. Secretions can drain away freely, preventing moist chambers.

In addition, the gauze tulle can easily be cut into small pieces, e.g. as a secure matrix for split-thickness skin grafts. If required, the ointment dressings can be fixed to healthy skin with sutures.

Any wound-specific therapeutic agents that may be required can be added at any time.

Medicomp non-woven swabs can be a suitable alternative to classic gauze swabs for many applications on the ward and in outpatient care.

Application:
For interactive moist wound therapy, in particular for wound cleansing and to support wound bed preparation.

Characteristics:
Medicomp non-woven swabs made from 70% cellulose and 30% polyester fibres have an open, gauze-like structure. This makes them highly absorbent, soft and air-permeable.

The non-woven material is strengthened purely mechanically and is free from binders and optical brighteners.

For cost-effective use, Medicomp non-woven swabs are available in different ply counts and sizes, ready-to-use in sterile and non-sterile versions.

Medicomp nonwoven swabs can be a suitable alternative to classic gauze swabs for many applications on the ward and in outpatient care.

Application:
For interactive moist wound therapy, in particular for wound cleansing and to support wound bed preparation.

Characteristics:
Medicomp nonwoven swabs made from 70% cellulose and 30% polyester fibres have an open, gauze-like structure. This makes them highly absorbent, soft and air-permeable.

The nonwoven material is bonded purely mechanically and is free from binders and optical brighteners.

For cost-effective use, Medicomp nonwoven swabs are available in different ply counts and sizes, ready-to-use sterile and non-sterile.

Sorbalgon is made of soft, textile calcium alginate fibres that transform into a gel-like material on contact with sodium salts, such as those found in blood and wound exudate. This provides therapeutic benefits for wound healing that have not previously been achievable with conventional textile dressing materials.

Application:
In principle, for the care of all external wounds, but especially for bleeding and exuding wounds, because gel formation supports wound healing here, e.g. in venous leg ulcers (ulcus cruris venosum), pressure ulcers, abscesses, boils, burns, as well as wounds that are difficult to manage in trauma and tumour surgery; Sorbalgon T is available for deep wounds and fistula tracts.

Characteristics:
Sorbalgon is not woven, but consists of a soft fibre mat that can be excellently packed and draped. With Sorbalgon, deep and irregular wounds can therefore also be treated optimally, because the adaptation to the wound surfaces, which is so important for wound healing, is always ensured.

Sorbalgon has a very high absorbency. The bacteria-laden exudate is absorbed into the fibres themselves and, through the conversion, is securely retained within the gel structure. Wounds are cleaned quickly.

The gel-like consistency of Sorbalgon also acts like a moist dressing that prevents the wound from drying out and regulates physiological secretion. A microclimate favourable to wound healing is created without an occlusive effect. Granulation and epithelialisation are promoted, the wound surfaces remain supple, which also leads to cosmetically favourable wound healing results.

Due to gel formation, Sorbalgon does not adhere to the wound. Dressing changes take place without irritation of the new tissue.

Sorbalgon contains no active medicinal additives and is particularly well tolerated even with long-term use. Allergic reactions and sensitisation have not been reported to date.

Sorbalgon is available as compresses in three sizes. Sorbalgon T is available in two versions as packing strips, especially for more voluminous wounds.

Zetuvit was specially developed for the management of heavily exuding wounds. It consists of four different material layers that complement each other perfectly and give the absorbent dressing its convincing properties.

Application:
For the management of heavily exuding wounds in all medical fields; for padding wounds.

Characteristics:
A particularly effective two-layer nonwoven is used for the outer covering: the wound-contact layer made of hydrophobic polyamide fibres does not absorb liquid itself and thus helps prevent adherence to the wound. By contrast, the inner side of the nonwoven made of hydrophilic viscose fibres has a high capillary action, which rapidly channels exudate into the absorbent core.

Highly bleached tissue cellulose distributes the exudate so that the storage capacity of the absorbent core can be used more effectively.

The absorbent core made of soft cellulose fluff pulp has a high absorption capacity and good cushioning effect.

A moisture-repellent but breathable layer of polypropylene nonwoven on the back of the dressing prevents strike-through of exudate and thus also serves as protection against contamination.

Zetuvit is sealed all around and has especially soft embossed ends. A blue thread marks the reverse side of the dressing to prevent application errors.

Zetuvit has been specially developed for the management of heavily exuding wounds. It consists of four different material layers that complement each other ideally and give the absorbent dressing its impressive properties.

Application:
For the management of heavily exuding wounds in all medical areas; for padding wounds.

Characteristics:
A particularly effective two-layer nonwoven is used for the outer wrap: the wound-contact layer made of hydrophobic polyamide fibres does not absorb liquid itself and therefore prevents adhesion to the wound. In contrast, the inner side of the nonwoven made of hydrophilic cellulose fibres has a high capillary action, which rapidly channels secretions into the absorbent core.

Highly bleached tissue pulp distributes the secretions so that the storage capacity of the absorbent core can be used more effectively.

The absorbent core made of soft cellulose fluff pulp has a high absorption capacity and provides good cushioning.

A moisture-repellent but breathable layer of polypropylene nonwoven on the back of the dressing helps prevent strike-through of secretions and thus also serves as contamination protection.

Zetuvit is sealed all round and embossed particularly softly at the ends. A blue thread marks the back of the dressing to prevent application errors.

Highly absorbent, wound-friendly absorbent dressings with a special absorbent core made of soft cellulose fluff and high-retention superabsorbent, enclosed in a fluid-distributing nonwoven; water-repellent, air-permeable special nonwoven on the side facing away from the wound as protection against contamination, dyed green to avoid application errors; outer wrap made of silky-soft, non-adherent two-layer nonwoven which, thanks to its capillary action, quickly channels exudate into the absorbent core; soft and air-permeable, easy to drape, with high cushioning effect

Application:
For the management of heavily exuding wounds in all medical settings; especially, for example, for surgical wounds, lymphatic wounds, venous leg ulcers (ulcus cruris), ulcerating tumours; also suitable as a wound dressing under compression bandages

The YPSISOFT absorbent dressings from HOLTHAUS are ready-to-use dressings consisting of an elastic fixation bandage, a non-woven dressing pad and adhesive strips for fastening the bandage. Practical and easy to use for minor injuries without assistance.
Individually sterile packed.

Product data:

Sizes
Size 1 - 4 x 5 cm for fingers
Size 2 - 6 x 8 cm for fingers/hand/foot
Size 3 - 8 x 10 cm for hand/foot/arm/leg

Sterile: yes

The YPSIPAD gauze swabs are made of 17-thread conforming gauze in accordance with DIN EN 14 079, Ph.Eur.
Folded into 8 layers, with folded-in cut edges.

Product data:

Size: 5 to 10 cm
Sterile: no
Standard: DIN EN 14 079

The YPSIPAD gauze swabs are made of 17-thread dressing gauze in accordance with DIN EN 14 079, Ph.Eur.
Folded into 8 layers, with folded-in cut edges.
Individually sterile sealed, 2 pieces each.

Product data:

Size: 5 to 10 cm
Sterile: yes
Standard: DIN EN 14 079

The YPSISAN wound dressings from HOLTHAUS are highly absorbent, non-adherent nonwoven compresses. Individually sterile sealed.

Product data:

Size: 10 x 10 cm
Sterile: yes

The YPSIVIL absorbent cellulose non-woven compress by HOLTHAUS is made from highly bleached dressing cellulose with a silky-soft, non-adherent non-woven layer.
Supplied in a practical dispenser box that allows removal without touching the remaining product.

Product data:

Size: 10 cm x 10 m
Colour: white
Sterile: no