The practical leg pouch is designed to be worn comfortably on the thigh or on a belt. It offers space to carry essential emergency equipment or a limited amount of medical kit close at hand, without needing to carry a separate backpack.
Partly made from robust Hyperlon neoprene, the pouch is highly durable even when used under demanding conditions.

With a pull on the reflective, clearly visible grab tab, the lid of the leg pouch can be opened quickly or removed completely. This allows fast access to the contents.
Inside, it features a wide range of compartments. In addition, the TOOL'S is equipped with an externally mounted tool pocket, e.g. for a hammer, where the tool handle is held close to the pouch thanks to a fastening loop.

Equipment:

Main compartment with 7 slip pockets

1 slip pocket for e.g. a hammer and retaining strap with hook-and-loop fastener on the outside on the left side

1 retaining strap with hook-and-loop fastener on the outside on the right side

Large lid flap with reflective grab tab

Removable hook-and-loop patch on the outside of the lid for e.g. individual identification

Belt loop with two buckles for quick, easy putting on and taking off the pouch

Continuously adjustable leg straps

Reflective strips on the front for increased visibility

Base of the pouch and the hammer pocket reinforced with Hyperlon for longer service life and resistance to mechanical stress

Scope of delivery:

Leg pouch without any additional accessories shown

Product data:

Colour: black
Weight: approx. 440 g
Dimensions (W x D): 15 x 22 x 8 cm
Material: polyester

Fashionable, dynamic care bag with an integrated, stowable backpack carrying system. Removable module pouches and closable mesh pockets provide an excellent overview and make work on the patient easier.

Features:
- Large main compartment with:
- 2 removable transparent zip module pouches
- 1 opaque zip module pouch
- 1 removable, thermally insulated ampoule case
- Inside of the lid with 3 zip mesh pockets (1x large, 2x small)
- Front compartment with zip:
- 1 document compartment for paperwork or a tablet PC
- 2 compartments for additional accessories
- removable, padded shoulder strap
- padded carry handle
- integrated, stowable backpack carrying system

Scope of delivery:
- Bag with 3 module pouches and 1 ampoule case
- Carry strap
- 1 CONBIO´S disposal container
- 1 GEL cooling pack
Without any additional or illustrated accessories

Product data:

Colour: mottled grey/ lemon
Weight: approx. 2,000 g
Dimensions (W x H x D): 40 x 30 x 16 cm
Volume: approx. 19 litres
Material: polyester

The VEST’S operational vest is suitable for a wide range of applications thanks to its modular extension options. Whether in emergency medical services, with a search and rescue dog unit, a drone team, etc., the VEST’S is the practical solution for carrying equipment directly on the body.
The two large, external zip pockets are quickly accessible. Additional pouches or holsters can be attached to the all-round integrated MOLLE system depending on individual needs.
Two front-accessible zipped compartments provide space for documents, topographic maps or other equipment.

Especially for longer deployments, such as search operations etc., the VEST’S operational vest impresses with its integrated compartment for a hydration bladder and its breathable mesh fabric for high wearing comfort and good ventilation under the vest.

The vest can be individually adjusted in length and girth and is available in two base sizes:

Size S - M:
- Height: 52 – 56 cm
- Girth: 92 – 142 cm

Size L - XL:
- Height: 52 – 56 cm
- Girth: 100 – 150 cm

Features:

Front with:
- 2 external zip pockets
- 2 compartments for documents or other equipment
All-round integrated MOLLE system
All-round reflective strips (total area: 0.045 m²)
Integrated compartment for hydration bladder
Hook-and-loop area at the upper back (W x H: 18 x 10 cm) with:
- 2 hook-and-loop patches, unlabelled, each (W x H): 18 x 5 cm
Carry handle at the back, above the hook-and-loop area
Breathable fabric

Product data:

Colour: red
Weight: S - M: approx. 835 g | L - XL: approx. 865 g
Dimensions (H x G): S - M: 52-56 x 92-142 | L - XL: 52-56 x 100 - 150
Material: polyester
Total area reflective strips: 0.045 m²

Adapter for 5 round-bottom tubes 2–7 mL, 12.5 mm × 100 mm, for 100 mL round bucket in rotor A-4-38, 2 pieces

This is a very compact, small spectrophotometer with the option of carrying out measurements in the UV and VIS range. In a spectral range from 200 nm to 830 nm, single-wavelength measurements can be performed or absorbance spectra can be recorded.

Product data:

- BioSpectrometer basic
Compact spectrophotometer for applications in cell and molecular biology as well as biochemistry

- Eppendorf uCuvette G1.0
Microvolume cuvette for photometric quantification of nucleic acids and proteins (A 280 nm) as well as for colorimetric protein assays; can be used with the Eppendorf BioPhotometer plus and the BioSpectrometer

The lids for the microplate buckets are suitable for various rotors.

Product data:

-Suitable for rotor S-4-104 and rotor S-4x750
-Set of 2 pieces

Lids for 750 ml round cups

Product data:

Suitable for rotor
-S-4-104
-S-4x750
-S-4x1000

Set of 2 pieces

The Centrifuge 5425 is the new laboratory standard. With a capacity for 24 vessels and a speed of up to 21,300 x g, it is perfectly suited for all modern molecular biology applications using Eppendorf and PCR tubes. The Centrifuge 5425 is used to separate liquid mixtures of substances with different densities, in particular for the processing and analysis of samples from the human body as part of an in vitro diagnostic application, to enable use of the in vitro diagnostic device in accordance with its intended purpose. This centrifuge, including its components, is an in vitro diagnostic device within the meaning of Directive 98/79/EC of the European Parliament and of the Council of 27 October 1998. Eppendorf centrifuges are intended exclusively for indoor use and for operation by trained specialist personnel.

- whisper-quiet microcentrifuge for stress-free work
- aerosol-tight Eppendorf QuickLock® lids for easy and safe handling
- outstanding software features (e.g. 10 acceleration and braking ramps, 3 programme buttons, short function without having to keep the button pressed)
- extended rotor programme (e.g. 5.0 mL rotor, swing-bucket rotor for PCR strips)
- OptiBowl® design for quiet operation, even without the rotor lid
- ergonomic lid operation with just one finger
- automatic lid opening at the end of the run – prevents sample warming and enables easy access to the samples

Product data:
- maximum rotor capacity: 10 x 5.0 mL tubes
- Max. RCF: 21,300 x g
- Max. speed: 15,060 rpm
- Mains connection: 230 V, 50–60 Hz
- Dimensions (W x D x H): 24 x 39 x 24 cm
- Height (with lid open): 48 cm
- Weight without accessories: 15.6 kg

Centrifuge 5430 without rotor, with membrane keypad
48-place microcentrifuge for 1.5/2.0 ml reaction tubes, up to 30,130 x g / 17,500 rpm, 230 V / 50–60 Hz, choice of 12 different rotors, e.g. MTP rotor, Falcon rotor, automatic rotor recognition, stores up to 50 routine programmes, menu-guided operation in 4 languages (English, German, French, Spanish), backlit LCD display, automatic lid opening at the end of the run, dimensions (W x D x H): 33 x 42 x 25 cm, height with lid open: 56 cm, weight: 29 kg

Centrifuge 5430 with FA-45-30-11 rotor, aerosol-tight, with membrane keypad
48-place microcentrifuge for 1.5/2.0 ml reaction vessels, up to 30,130 x g / 17,500 rpm, 230 V/50–60 Hz, with FA-45-30-11 rotor, choice of 12 different rotors, e.g. MTP rotor, Falcon rotor, automatic rotor recognition, stores up to 50 routine programmes, menu-guided operation in 4 languages (English, German, French, Spanish), backlit LCD display, automatic lid opening at the end of the run, dimensions (W x D x H): 38 x 64 x 29 cm, height with lid open: 63 cm, weight: 56 kg

Centrifuge 5702 RH without rotor, refrigerated and heated
230 V / 50–60 Hz, as Centrifuge type 5702, active heating adjustable from -9°C to +42°C, ready for immediate operation thanks to standby warming/cooling, temperature at steady state at 4°C and at 37°C ± 1°C, dimensions (W x D x H): 38 x 58 x 26 cm, height with lid open: 60 cm, weight: 36 kg

Centrifuge 5702 R, rotary knobs, refrigerated, with
Rotor A-4-38 incl. adapters for 13/16 mm
blood collection tubes, 2 sets with 2
adapters, 230 V/50–60 Hz (EU)

Product features:
- Maximum capacity for round-bottom tubes
per rotor: 16 × 13 mm / 16 × 16 mm
Technical specifications:
- Dimensions (W × D × H): 38 × 58 × 27
cm / 15 × 22.9 × 10.6 in
- Weight without accessories: 35 kg / 77.4 lb
- Mains connection: 230 V, 50–60 Hz

Centrifuge 5702 R without rotor, refrigerated
230V / 50–60 Hz, like centrifuge model 5702, additionally temperature range from -9°C to +40°C, achievable even at ambient temperatures of up to 40°C, Fast Temp and stand-by cooling via vibration-free, frequency-controlled refrigeration unit of the new generation, dimensions (W x D x H): 38 x 58 x 26 cm, height with lid open: 60 cm, weight: 36 kg

Centrifuge 5702 without rotor
230 V / 50–60 Hz, universal benchtop centrifuge for highly efficient loading with max. 4 x 100 ml containers, 16 x 20 ml DIN containers or 20 blood collection tubes in the swing-out rotor, 30 x 15 ml or 10 x 15 ml and 20 x 15 ml Falcon tubes in the fixed-angle rotor F 35-30-17, maximum capacity 450 ml, max. RCF 3,000 x g, max. speed: 4,400 rpm, dimensions (W x D x H): 32 x 40 x 24 cm, height with lid open: 53 cm, weight: 20 kg

This unit is suitable for refrigerated and non-refrigerated centrifugation with low, medium and high throughput.

Product data:

- Refrigerated benchtop centrifuge
- Max. load 4 x 250 ml
- Max. RCF: 20,800 x g
- Speed control up to 14,000 rpm
- Adjustable temperature range: -9 °C to 40 °C
- Stand-by cooling
230 V/50–60 Hz

- incl. swing-out rotor S-4-72
- incl. 4 aluminium round buckets, 250 ml each, for use with adapters for vessels up to max. Ø 72 mm
- incl. 2 SA adapters for 15 ml conical tubes (each with 8 bores, Ø 17.5 mm)
- incl. 2 SA adapters for 50 ml conical tubes (each with 4 bores, Ø 31 mm)
- 1 SA = 2 pieces

This device is suitable for refrigerated or non-refrigerated centrifugation, with low, medium or high throughput.

Product data:

- Refrigerated benchtop centrifuge
- Max. load: 4 x 750 ml
- Max. RCF: 20,800 x g
- Speed control up to 14,000 rpm
- Adjustable temperature range: -9 °C to 40 °C
- Stand-by cooling
- 230 V / 50–60 Hz
- Incl. swing-out rotor S-4-104
- Incl. 4 aluminium round buckets, 750 ml each, for holding adapters for vessels up to max. Ø 104 mm
- Incl. 2 SA adapters for 15 ml conical tubes (each with 14 bores Ø 17.5 mm)

MiniSpin plus centrifuge with Rotor F-45-12-11
Microcentrifuge with speed control from 800 rpm to 14,500 rpm, RCF 14,100 x g, 230 V/50–60 Hz, incl. "Black-Line" Rotor F-45-12-11 (aluminium), 12 bores, 45° angle, for 1.5/2.0 ml reaction tubes with max. Ø 11 mm, complete with lid (stainless steel) and rotor nut, with continuous centrifugation function, dimensions (W x D x H): 22.6 x 23.9 x 13 cm, height 25 cm (with lid open), weight 4.3 kg