Emergency backpack made of red AEROtex® Plan tarpaulin material,
two-part interior with transparent compartments, loops and a holder for a 0.8/1.0/2.0 litre O2 cylinder.


Additionally, 2 large, 1 elongated and 2 small external pockets; 2 inner pockets each AEROcase® CS, CM and CL as well as 1 inner pocket AEROcase® CXL,
padded backpack shoulder straps with stowage compartment, carry handle at the top and on the side.

incl. 7 module pouches

AEROtex® Plan is a high-quality and durable tarpaulin material.
It was specially designed for professional use in emergency medical services.
Thanks to the PVC coating on both sides, the tarpaulin material
is highly resistant to stress and also
waterproof. It is characterised by extreme scratch and tear resistance
and is also very hard-wearing. The surface can be cleaned
with suitable tarpaulin cleaners and also with suitable disinfectants.


Material: tarpaulin material (AEROplan)
Colour: red or yellow
Size: 48 x 54 x 25 cm (W, H, D
Volume: 55 litres
Weight: 5.1 kg

Characteristics
Gold/silver emergency blanket for first aid; for protection against heat and cold in road traffic, workplace, skiing and mountain accidents; component in accordance with DIN 13164, DIN 13157 and DIN 13169 for the first-aid kit; min. 160 x 210 cm

- Set consisting of:

- Air Liquide Soffio Cube Year Pack, consisting of 1 x nebuliser, 1 x mouthpiece, 1 x adapter, 1 x air tube 1 m, 6 x air filters, 1 x adult mask, 1 x child mask, 2 x rubber straps for masks.

Consisting of 1 Guedel airway each

Sizes: 000, 00, 0, 1, 2, 3, 4, 5. Non-sterile, colour-coded

Battery pack for torneo II

This sling has a similar cut pattern to the comfort sling with integrated head support; however, thanks to the mesh structure of the material it is water-permeable and dries quickly. It is therefore particularly well suited for wet areas.

Technical data
Standard: DIN EN ISO 10535:2007-04, maximum load: 150 kg

Material composition:
Loop material: polyester webbing,
Outer fabric: 100% polyester mesh;
Padding (leg supports): 100% PE foam;
Back reinforcement: aluminium strips

Strong – reliable – economical

The mobile standard and active mini lift aks-mini dualo® completes the aks lift family. The dual principle focuses on greater flexibility and freedom of choice. The mini lift meets all the requirements of a “full-size” lift, but is more manoeuvrable and easier to handle thanks to its more compact dimensions.

The advantages of the dualo® mini
• Multifunctionality: optimum use of the versatile functions of a standard and/or stand-up lift, such as lifting, transferring and assisting people to stand up; picking up from the floor in a lying position is possible
• max. load capacity 150 kg
• Flexibility: easy conversion from standard lift to active lift and vice versa; simplified plug-in function thanks to stainless steel square tubes
• Freedom of choice: Take your time. If you decide, for example, on a standard lift, you can retrofit the active lift stand-up arm and the corresponding equipment at any time
• the stand-up arm also has side grips for greater comfort and support
• Cost-effectiveness and efficiency: lower purchase costs and high utilisation frequency; needs-based use as a dual lift is particularly useful in care facilities
• ideal for small rooms and narrow doorways
• mechanical emergency lowering, emergency stop switch in the event of electrical faults, visual and audible warning to prevent deep discharge
• high stability thanks to mechanical spreading of the chassis via foot pedal, two lockable castors

Options and accessories
• various lift slings and spreader bars, spreader bar padding, charger, spare battery, aks lift scales, see from p. 16 onwards
• additional aks battery pack with separate wall charging station promotes independence in daily care.

Consisting of:
87113 aks-mini dualo lift base
87190 aks-mini dualo standard lifting arm
79720 aks standard transport spreader bar, water blue

Flexible – economical – safe
The dual principle focuses on greater flexibility and freedom of choice. Particular emphasis has been placed on increased comfort, safety and multifunctionality. The aks-dualo® is used to transfer and raise a person in combination with aks lifting slings for care at home or in a residential/nursing home.

The advantages of the aks-dualo®
• Multifunctionality: optimum use of the versatile functions of a standard lifter and/or a stand-up lifter, such as lifting, transferring and raising people (Fig. 1, 4), picking up directly from the floor, assistance with hygiene, ideal for small spaces and narrow doors
• Flexibility: easy conversion of the standard lifter into an active lifter and vice versa (Fig. 2, 3), simplified plug-in connection thanks to stainless steel square tubes
• Freedom of choice: Take your time. If you decide, for example, on a standard lifter, you can retrofit the stand-up arm of the active lifter and the corresponding equipment at any time
• Cost-effectiveness and efficiency: lower purchase costs and high utilisation rate, needs-based use as a dual lifter – particularly useful in care facilities
• mechanical emergency lowering, emergency stop switch, visual and audible warning against deep discharge
• high stability thanks to mechanical spreading of the chassis via foot lever, two lockable castors

Consisting of:
87012 aks-dualo lifter base
87090 aks-dualo lifting arm standard
79720 aks standard transport spreader bar, water blue

Options and accessories
• various lifting slings and spreader bars, spreader bar padding, charger, replacement battery, aks lifter scales
• additional aks battery pack with separate wall-mounted charging station promotes independence in daily care

with standard lifting arm, WITHOUT spreader bar and WITHOUT sling

Weighing patients is part of everyday care practice.
It is particularly practical to use scales that are connected directly to the assistive device, i.e. the patient hoist.
aks offers two weighing units in combination with the various aks standard hoists.

Ideal aid for weight monitoring
• easy to use: on/off function, tare button, hold
• flexible use: can be used with an adapter for all aks hoists
(with aks-foldo® the scale cannot be used in the swivelled position)
• display indications: readability in 500 g increments,
“E” when the weighing range is exceeded; “LO” when the battery is low
• energy-saving function: automatic switch-off after approx. four minutes
• max. weighing capacity: 150 kg
• cost-effective standard solution for everyday care use

Basic care for at-risk patients

This foam cube cushion is suitable for wheelchair users who are mobile enough to change their position repeatedly. The correct compression firmness of the cushion and the cube structure ensure consistently good pressure distribution and low shear forces. With aks-inkoair® seat cushion cover.

Patient weight: 40–120 kg
Dimensions: 42 x 42 x 9 cm
Pressure ulcer grade: prophylaxis

The XS among the aks standard hoists

The aks-micro foldy® has been made even smaller, even more manoeuvrable and designed for functionality.

Advantages of the aks-micro foldy®
• compact dimensions, even smaller than the aks-mini foldy®
• ideal for very tight spaces and very narrow doorways
• for small adults and children up to a maximum body weight of 130 kg
• plug-in mast, easy to remove without tools (Figure 2)
• ideal travel companion and easy to store away
• simple, straightforward operation
• hand control with large buttons
• mechanical base widening via foot pedal
• high stability thanks to robust construction
• low under-bed clearance, also suitable for aks scissor beds
• increased safety thanks to mechanical emergency lowering and emergency stop switch (Figure 1) in the event of electrical faults
• visual and acoustic warning to prevent deep discharge of the batteries when operating the hand control
• independence from the mains power supply thanks to battery operation

Options and accessories
• more flexibility and autonomy with the aks battery pack with separate wall-mounted charging station
• aks hoist slings and spreader bars available separately – NOT included in the scope of delivery

For pressure ulcer prevention and treatment. The extra benefit of stable soft positioning

Cube mattress with a stable base for optimum soft positioning. Also specially suited for low body weights thanks to an especially soft, cube-structured lying surface.

The advantages of the aks-microplot plus
• cube-structured lying surface with low compression hardness for optimised soft positioning
• specially rounded cube surfaces ensure better distribution of the patient’s weight over the largest possible area; this reduces contact pressure while decreasing shear forces
• the cube cut enables air circulation within the mattress
• reinforced edge zones to support patient mobilisation
• adaptable when adjusting the bed’s lying surface
• optionally available with aks-inkocover fitted cover or with aks-inkoair® mattress cover (also available)

Patient weight 40–120 kg
Pressure ulcer grade up to and including Grade II (according to EPUAP)

Please make sure when placing your order to select whether you require an assembly service for the bed or not (variant selection – with or without assembly):

If you order the bed with assembly service, an assembly appointment must be arranged via our customer support. Due to capacity constraints, a prompt assembly date immediately after delivery cannot always be guaranteed, so you may need to allow for some waiting time between delivery and assembly.

Please also note that the manufacturer delivers the bed “kerbside” only – as a rule, delivery to the installation location is not included. By the agreed assembly date, it must be ensured that the bed to be assembled is already at its final installation location and that the premises have been prepared accordingly for installation in terms of space and cleanliness.

Product description:

aks developed the SB L to XXL bed series for heavy and tall patients. The SB L model is intended for people up to 150 kg body weight who, due to their anatomy, cannot be cared for with standard beds.
The SB XL can be used for care recipients up to a body weight of 200 kg and features higher head/foot panels and three side-rail bars. The SB XXL completes the heavy-duty range. With its particularly stable double scissor lift, the heavy-duty bed easily achieves the top performance of up to 300 kg patient weight.

Advantages of the SB L to SB XXL nursing beds
• increased lying comfort thanks to four-section mattress platforms, height and backrest electrically adjustable
• maximum functionality and safety: the foot section with knee break can be electrically adjusted via the handset from the bed without nursing assistance – patent protected!
• protection against falling out: integrated wooden side rails on both sides; SB XL and XXL with three bars and particularly high head and foot panels
• stable construction with powerful single scissor lift (aks-SB L and XL) and 125 mm castor diameter
• high stability for bariatric care thanks to a specially developed double scissor lift with 8 castors, 100 mm diameter on aks-XXL
• a wide range of different versions in size and maximum patient weight
• mains cut-off: this safety system disconnects the bed from the power supply on all poles when the handset is not being operated
• handset with large buttons, lock function and option to test first-fault safety
• including lifting pole and grab handle
• special colour RAL 7035, light grey

Foam mattress for the aks-SB XXL nursing bed series

Version RG50, RP 5080 compression hardness 8.0, height 15 cm, up to 300 kg

Foam mattress for example for item 17593-01

Standard transport handle including padding for the models aks-dualo and aks-mini dualo

Transport belt for item 17463-01

Standard transport bracket including padding for aks foldy

Transport belt for item 17426-01

Standard transport handle including padding for the model aks micro foldy

Transport belt for item 17448-01

The universal comfort sling is made of flexible woven fabrics that adapt to the patient’s body.
This sling is intended for use in dry environments and is suitable for lifting patients with leg amputations.
A handle loop for manoeuvring the patient in the sling is fitted in the head/shoulder area.

Product data:

Standard: DIN EN ISO 10535:2007-04
Maximum load: 150 kg

Material composition:
Loop material: polyester webbing;
Attachment strap: polyester webbing;
Rings, carabiners: steel;
Outer fabric: 100% polyester;
Reinforcement below the loops:
Aluminium strips