Colour: Black
Made from polyester

Pressure regulator with 2 outlets (shown here with ZGA-DIN coupling and 9/16" outlet).
1st outlet: Flow control (0 / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 9 / 12 / 15 / 25 l/min). 9/16" hose barb outlet. Outlet pressure 2.5 bar.

2nd outlet: ZGA-DIN coupling or 3/8" connection, e.g. for ventilators. Outlet pressure 4.5 bar. Cylinder contents pressure gauge in low-profile design with rubber protective ring.


The pressure regulators distributed by us have had a lifetime of 10 years since 2016 and are MAINTENANCE-FREE within this period!! This means that no further maintenance costs are incurred during this time. According to the manufacturer, neither STK nor MTK is required.

The following applies to all our pressure regulators: the pressure gauge is well protected, low-profile, compact and easy to read, and can be rotated 360°; optimal readability under all conditions. The 360° swivel flow outlet 9/16" enables flexible connection in all directions. Self-centring flow adjustment handwheel with 2 display windows on all pressure regulators with variable flow; uninterrupted flow even between the individual switching stages.

1 piece

Pressure reducer as a distribution valve up to 120 l/min. Special pressure reducer as a distribution valve in the ambulance. Approved up to 300 bar, max. flow 120 l/min.

Outlet pressure:
4.5 bar, inlet G ¾” to DIN 477, outlet connection 3/8” male thread. Cylinder contents pressure gauge in flat design with rubber protective ring. Available in various versions with variable connection studs (long or short version).



The pressure reducers distributed by us have, since 2016, a lifetime of 10 years and are MAINTENANCE-FREE during this period!! This means that no further maintenance costs are incurred during this time. According to the manufacturer, neither STK nor MTK is required.

The following applies to all our pressure reducers: the pressure gauge is well protected, flat, compact, easy to read and rotatable through 360°; optimum readability under all conditions. The 360° swivel flow outlet 9/16” allows flexible connection in any direction. Self-centring flow adjustment handwheel with 2 display windows on all pressure reducers with variable flow; uninterrupted flow even between the individual switching stages.

1 piece

Pressure reducer as a distribution manifold up to 120 l/min. Special pressure reducer as a distribution manifold in ambulances. Approved up to 300 bar, max. flow rate 120 l/min, outlet pressure 4.5 bar, inlet G ¾” to DIN 477, outlet connection ZGA DIN coupling. Cylinder contents pressure gauge in a low-profile design with rubber protective ring. Available in various versions with variable connection bolts (long or short version).

The pressure reducers distributed by us have had a lifetime of 10 years since 2016 and are MAINTENANCE-FREE within this period!! This means that no further maintenance costs are incurred during this time. According to the manufacturer, neither STK nor MTK is required.

The following applies to all our pressure reducers: the pressure gauge is well protected, low-profile, compact and easy to read, and can be rotated 360°; optimal readability under all conditions. The 360° swivel flow outlet 9/16” enables flexible connection in all directions. Self-centring flow adjustment handwheel with 2 display windows on all pressure reducers with variable flow; uninterrupted flow also between the individual switching stages.

1 piece

Compact pressure regulator with adjustable flow settings (0 / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 9 / 12 / 15 / 25 l/min) and self-centring handwheel with 2 flow windows. Inlet G ¾" to DIN 477, outlet 9/16". Cylinder contents gauge in a low-profile, compact design; cylinder contents gauge rotatable through 360°. 360° swivel flow outlet enables flexible use in all applications. Constant flow, even if the handwheel is held in an intermediate position.

The pressure regulators distributed by us have had a 10-year lifetime since 2016 and are MAINTENANCE-FREE within this period!! This means there are no further maintenance costs during this time. According to the manufacturer, neither an STK nor an MTK is required.

The following applies to all our pressure regulators: the gauge is well protected, low-profile, compact and easy to read and can be rotated through 360°; optimum readability under all conditions. The 360° swivel flow outlet 9/16" enables flexible connection in all directions. Self-centring flow adjustment handwheel with 2 display windows on all pressure regulators with variable flow; uninterrupted flow even between the individual switching steps.

- Length approx. 12 cm
- Ø approx. 4 cm
- Weight approx. 650 g

1 piece

Compact pressure regulator with adjustable flow settings (0 / 0.25 / 0.5 / 0.75 / 1 / 1.5 / 2 / 2.5 / 3 / 4 / 5 / 6 l/min) and self-centring handwheel with 2 flow windows. Inlet G ¾” to DIN 477, outlet 9/16”. Cylinder contents pressure gauge in a flat, compact design; cylinder contents pressure gauge rotatable 360°. 360° swivelling flow outlet enables flexible use in all applications. Constant flow, even if the handwheel is held in an intermediate position. Available in various versions with variable connection pin (long or short version).

The pressure regulators distributed by us have had a lifetime of 10 years since 2016 and are MAINTENANCE-FREE within this period!! This means there are no additional maintenance costs during this time. According to the manufacturer, neither STK nor MTK is required.

For all our pressure regulators: the pressure gauge is well protected, flat, compact and easy to read and rotatable 360°; optimum readability under all conditions. The 360° swivelling 9/16” flow outlet enables flexible connection in all directions. Self-centring flow adjustment handwheel with 2 display windows on all pressure regulators with variable flow; uninterrupted flow even between the individual switching stages.

- Length approx. 12 cm
- Ø approx. 4 cm
- Weight approx. 650 g
- MRI-compatible

1 piece

Carrying bag, universal mains cable and car charging cable. This device has adjustable power levels from 1 to 5, which corresponds approximately to the output in litres, and a weight of 2.2 kg.

Trolley, universal mains cable and car charging cable.
This device has adjustable output levels triggered from 1 to 6, which roughly correspond to the output in litres, and in continuous flow output levels from 0.5 to 2 litres, as well as a weight of 4.6 kg.

Carrying bag, universal mains cable and car charging cable. This device has adjustable power levels from 1 to 5, which correspond approximately to the output in litres, and a weight of 2.5 kg.

Colour: White

The wall bracket is a sturdy hot-dip galvanised sheet steel construction with chain safety catch and drilled holes for wall mounting.

Basic trolley 08/16, 730 mm high, with drawers.
- coherent, well-developed system - particularly stable square steel tube frame - high-quality white coating - castors Ø 75 mm - Dimensions (W x D x H): 60 x 45 x 73 cm

Lightweight design suitable for small devices, with a super-mobile chassis, two-part aluminium support profile with decorative strips at the front and rear, and integrated cable ducts. Ideally suited for mounting various panels, power strips and different, easily adaptable accessories. The bravo® base trolley is a mobile light-duty equipment trolley with virtually endless applications, e.g. in medical practices, laboratories, dental practices, clinics, beauty studios, meeting rooms and industrial facilities.

- Stable cast aluminium chassis, powder-coated basalt grey (RAL 7012)
- 4 high-quality twin swivel castors (Ø 75 mm) with 2 brakes and grey wall bumpers
- With metal shelf 443 x 400 mm (W x D), load capacity: approx. 5 kg
- Pull handle and 2 lateral push handles
- Support profile 780 mm high
- Dimensions: 577 x 577 x 986 mm (W x D x H)
- Maximum load capacity: 25 kg

Lightweight design suitable for small devices, with a highly mobile chassis, two-piece aluminium support profile with decorative strips at the front and rear, and integrated cable ducts. Ideally suited for mounting various panels, power strips and different, easily adaptable accessories. The bravo® computer trolley is a mobile light-duty equipment trolley suitable for use in GP surgeries, laboratories, dental practices, clinics, beauty studios, meeting rooms and industrial facilities.

- stable cast aluminium chassis, powder-coated basalt grey (RAL 7012)
- 4 high-quality twin swivel castors (Ø 75 mm) with 2 brakes and grey bumpers
- with metal shelf 280 x 400 mm (W x D), load capacity: approx. 5 kg
- integrated TFT mount (VESA standard 75 / 100 mm), swivel and tilt, for mounting flat monitors
- support profile 780 mm high
Dimensions: 577 x 577 x 1393 mm (W x D x H)
- Maximum load: 25 kg

The 08/16 cabinet trolley from HAEBERLE is 830 mm high and is supplied with a drawer, a compartment insert and doors.

Product data:

Colour: white
Castors: Ø 75 mm
Dimensions: 600 x 450 x 830 mm (W x D x H)

- robust trolley frame with 4 high-quality smooth-running castors Ø 100 mm
- elegant aluminium support profiles offer many mounting options for various system components and accessories
- convenient cable routing via integrated cable duct in the support profiles
- up to 4 additional drawers can be retrofitted

Total load capacity up to 120 kg
Load capacity shelf tray up to 30 kg
Distributed load per drawer up to 10 kg
Top width 450 mm
Dimensions: 565 x 571 x 793 mm (W x D x H)
Colour: white/grey