First Aid

For marking searched rooms or corridors.
The 30 cm-long CHECKER STRAP can be quickly attached to almost any type of door handle thanks to the cord stopper, without the need for complicated knotting, and offers a 100% secure hold even during positive-pressure ventilation.
The 12 mm wide strap, with its signal yellow colour and 8 mm continuous reflective stripe, is clearly visible even in smoke-filled rooms.

Pack size: 5 door marking straps per pack

The CHECKER door marking straps are ideal for use with the CHECKER POUCH cuff!

Details on use are compiled in the Service section:
Use of CHECKER POUCH

Scope of delivery:
without any additional accessories!

Specifications:
- Colour: yellow/silver
- Size: 30 cm x 1.2 cm
- Weight: 0.02 kg
- Material: 95% polypropylene, 5% nylon

With every reach, a door marking strap ready to hand, intuitive and reliable – that’s what defines the CHECKER POUCH sleeve.

A total of ten marking straps fit into the CHECKER POUCH. Each strap is neatly held in elastic loops inside the sleeve, and only the easy-to-grip cord stoppers are on the outside.

Each strap can be removed easily, individually by pulling on the cord stopper – in any order and in any pulling direction.

The sleeve itself is either worn on the arm over the protective jacket with its long Velcro fastener for a precise fit, or it can be attached with a carabiner to a belt or equipment loop.

The CHECKER POUCH sleeve is the ideal aid for door marking, allowing the marking straps to be removed easily even while wearing protective gloves!

Features:
- 10 slots for CHECKER STRAP
door marking straps (9861-2508)
- internal elastic loops for stowing
the marking straps and protection against
the straps getting tangled with each other
- 2 long Velcro strips for a precise fit on the arm
- 2 metal eyelets for attachment with a carabiner
to belt or jacket

Scope of delivery:
Sleeve, empty and without any other accessories shown


Specifications:
- Colour: blue
- Size: 42 x 11 x 2 cm
- Weight: 0.16 kg
- Material: 370G TEC Fire Retardant

The CRASH & CARRY training dummy is perfect for organising training exercises for the fire service, ambulance service and the Federal Agency for Technical Relief (THW).

Anyone who has ever prepared an exercise knows the problem: having to carry a training dummy on your own is virtually impossible, or at least involves an exhausting feat of strength.

This is where the CRASH & CARRY training dummy from TEE-UU shows its strength: the integrated, stowable carry system allows the dummy to be carried easily as a rucksack. Using two adjustable straps and robust metal buckles, the legs can also be secured to the dummy’s shoulder during transport. If there are two of you, the training dummy can be carried on the two straps like a travel bag.


Variable positioning:

On the head, torso and limbs of the training dummy, there are hook-and-loop (Velcro) loop panels on both sides for attaching injury patterns. Alternatively, ready-to-use laminated injury pattern cards fitted with Velcro strips can be ordered as accessories.

The design of the neck and head area is also suitable for applying a cervical collar or for practising motorcycle helmet removal.

Self-adhesive THERMO-PADs are also available for search exercises using a thermal imaging camera. Once activated, the THERMO-PADs provide a heat source sufficient for at least 4 hours.

The 170 cm CRASH & CARRY training dummy is filled by the user via a zip, individually up to a weight of 40 kg. A total weight of 25–35 kg is sufficient for a realistic training scenario and does not place unnecessary strain on the responders.


Tip for filling the training dummy:
For filling, we recommend, for example, fabric scraps or old clothing, such as heavy denim. By adding weights or stones wrapped individually in rags, the weight can be increased locally and as required.


Material information:
The 1680D TEC polyester fabric used for the CRASH & CARRY training dummy, with a 2 mm HighDurable PVC inner coating, ensures a long product service life when handled appropriately for “patient-safe” use.


Scope of delivery:
Training dummy without filling

Specifications:
- Colour: black
- Size (W x H x D): 70 x 170 x 22 cm
- Weight: 2 kg
- Material: 100% polyester

The CRASH JUNIOR training manikin is ideal for depicting training exercises and accident scenarios involving children.

Together with the large CRASH & CARRY training manikin, these two manikins can be used to cover a wide range of training and exercise scenarios.

On the head, torso and limbs of the training manikin there are hook-and-loop (loop) panels on both sides for attaching injury patterns with Velcro.

Alternatively, ready-to-use laminated children’s injury pattern cards fitted with Velcro strips can be ordered as accessories.

For search exercises using a thermal imaging camera, self-adhesive THERMO-PADs are also available. Once activated, the THERMO-PADs provide a sufficient heat source for at least 4 hours.

The 110 cm CRASH JUNIOR training manikin is filled individually by the user via a zip. A total weight of 15–20 kg is sufficient for a realistic training scenario and remains within the weight range expected for a child.

Tip for filling the training manikin:
For filling, we recommend, for example, fabric offcuts or old clothes, such as heavy denim. By adding weights or stones wrapped individually in rags, the weight can be increased locally and as required.

Material information:
The 1680D TEC polyester fabric used for the CRASH JUNIOR training manikin, with 2 mm HighDurable PVC inner coating, allows a long product service life when handled in a “patient-appropriate” manner.

Equipment:
- Loop panels for attaching injury patterns
- Unfilled weight: 0.75 kg
- Fill weight: individual, depending on filling material

Specifications:
- Colour: black
- Size (W x H x D): 50 x 110 x 17 cm
- Weight (unfilled): approx. 750 g
- Material: 1680D TEC polyester with 2 mm HighDurable PVC inner coating

Pear-shaped aluminium karabiner with triple-action gate locking in accordance with FwDV 1.

Suitable and approved for installation in the safety chain for rescue and self-rescue, e.g. when using the Italian hitch belay (HMS) and when deploying the fall arrest equipment kit.

Features:

- Breaking load:
- major axis: 23 kN
- minor axis: 8 kN
- gate open: 9 kN
- Gate opening: 22 mm
- Catch-free locking system
- Certified to EN 362.

Scope of delivery:
Karabiner without any additional accessories or illustrated accessories

Specifications:
- Colour: natural
- Size: 11 x 7 cm
- Weight: 0.1 kg
- Material: aluminium

The CT HMS Screw Karabiner is a pear-shaped aluminium carabiner with a classic screwgate.

Suitable and approved for integration into the belay chain for rescue and self-rescue,
e.g. when using an Italian hitch belay (HMS).

Features:

- Breaking load
- major axis: 23 kN
- minor axis: 10 kN
- gate open: 9 kN
- Gate opening: 23 mm
- Catch-Free locking system
- certified to EN 362


Scope of delivery:
Carabiner without any additional accessories or illustrated items


Specifications:
- Colour: natural
- Size: 11 x 7 cm
- Weight: 0.07 kg
- Material: aluminium

Two problems, one solution: the loss-proof transport of handheld radios and right-angle torches repeatedly poses a challenge for breathing apparatus wearers.

Everyone knows it: lean forward briefly and the radio falls to the ground. During operations, a loss of communication can have fatal consequences.
The HYBRID holster ensures secure transport and optimum accessibility of the devices on the shoulder strap of the breathing apparatus, but also on a belt or duty belt.

Depending on requirements and the operational situation, both device types can be quickly stowed in the holster.

The two elastic loops offer flexible space for wooden wedges or marking pens.

Scope of delivery:
Holster without any additional accessories shown

Specifications:
- Colour: blue
- Size: 19.5 x 9 x 5.5 cm
- Weight: 0.11 kg
- Material: 370G TEC Fire Retardant

The INJURY PATTERN SET is the ideal addition to the CRASH & CARRY training manikin!

With the 36 different depiction elements, a wide range of scenarios can be simulated quickly and very easily.

From head injuries, to the torso, right through to the limbs of the CRASH & CARRY training manikin, a wide variety of accidents or conditions can be simulated in seconds.

The basis for the depictions are laminated images, providing permanent protection. These images are simply attached to the training manikin using the Velcro strips fixed on the back.

The set of 36 sheets (up to A4 size) offers the possibility to depict both surgical and internal medicine emergencies.
All images are realistic, professionally made-up depictions and not real injuries.

Scope of delivery:
36-piece set without any additional accessories or illustrated accessories

Specifications:
- Size per injury pattern: max. 30 cm x 21 cm
- Film thickness: 0.125 mm
- Weight: 1 kg

This is ensured by the 4 mm thick, padded compartment with hook-and-loop fastener. A plastic ring on the bottom of the compartment prevents the TEE-LIGHT torch from switching on automatically. Double elastic straps on the sides provide space for spare batteries as well as for pens up to a maximum length of 13 cm.

The holster can be attached to a duty belt, belt or vest using a 25 mm wide loop secured with a metal press stud.

Features:
- Main compartment for torch
- 2 elastic loops
- Belt loop with press-stud security

Scope of delivery:
Holster without any additional accessories or illustrated accessories

Specifications:
- Colour: black
- Size: 16 x 5 x 4 cm
- Weight: approx. 60 g
- Material: 100% polyester, not flame-retardant

The MARKER PEN marking pen is ideal for marking and labelling on almost all surfaces!

The most common fields of use in the fire service are:

- Breathing apparatus operations
e.g. marking searched rooms or areas

- Technical assistance operations
e.g. marking cut and application points for hydraulic rescue equipment, or cordoned-off areas such as airbag zones, etc.

The MARKER PEN writes on virtually all surfaces:
metal, wood, plastic, concrete, rubber, glass and paper.
No matter whether the surfaces are wet, oily, rusty, smooth or rough.

The two different colours (red and yellow) make it possible, for example, to distinguish the markings of two breathing apparatus teams or to delineate cutting and cordoned-off areas.

Optimum operating temperature range: -45°C to +65°C


Scope of delivery:
MARKER PEN in yellow or red, without any additional accessories or illustrated accessories


Specifications:
- available colours: red, yellow
- size: 14 x 2 cm
- weight: 0.04 kg

Extra-large holster for higher demands, specially tailored to the needs of breathing apparatus wearers.
With the MASTER holster, you can carry important items of equipment directly on your body, always within reach and in sufficient quantity.

The two middle inner compartments are suitable, for example, for a torch, rescue shears, an operational knife or marking pens, etc.
Two approx. 40 cm long retaining cords with carabiner hooks secure the equipment against loss.
The large, wide inner compartment offers space for a rescue sling & HMS carabiner, marking pens or door marking tape, notepad, ballpoint pen and much more.
In the four outer elastic loops, wooden wedges can be stored securely for quick access.
The rear Vario double loops allow attachment to a fire service belt, breathing apparatus or trouser belt.

Thanks to its large volume, the MASTER holster is also suitable for use as a technical rescue (THL) holster for equipment at road traffic accidents, etc.

The large labelling field on the inside of the flap allows permanent identification (e.g. FF Musterstadt 40/1).

The 50 mm wide high-visibility reflective strip provides additional safety.

Equipment:
- 2 inner compartments (H x W x D): 15 x 7 x 3 cm
- 1 inner compartment (H x W x D): 15 x 14 x 3 cm
- 2 removable retaining cords (3 mm thick) approx. 40 cm with carabiner hooks
- 4 external elastic loops: 5 x 3 cm
- 50 mm high reflective strip
- Labelling field

Scope of delivery:
Holster without any additional accessories shown

Specifications:
- Colour: blue
- Size: 16 x 14 x 6 cm
- Weight: 0.16 kg
- Material: 95% cotton / 5% meta-aramid, flame-retardant

Convincing holster for extended equipment on duty.

Extra-fast access to infection protection gloves thanks to the GLOVE-FIX system. The gloves are stored compactly and securely, protected from damage (e.g. from a zip).

A knife/multitool compartment with a long hook-and-loop flap as well as three additional compartments on two levels provide space for medical instruments and useful equipment. The attached additional pocket offers space, e.g. for the pager or small items. Two elastic loops on the outside, e.g. for a torch or wooden wedges, complete this well-thought-out holster.

Duty belt or belt can be threaded through the carrying loops on the back both vertically and horizontally.

Equipment:
- 1 multitool/knife compartment
- 3 compartments on two levels
- 1 attached additional pocket
- 1 GLOVE-FIX system
- 2 elastic loops
- Carrying loops on the back

Scope of delivery:
Without any additional accessories shown

Specifications:
- Colour: black
- Size: 19.5 x 14 x 2.5 cm
- Weight: 0.09 kg
- Material: 100% polyester, not flame-retardant

TEE-UU’s bestseller in a limited special edition made from tarpaulin!!

Special – but of course just as functional as you know it:

The ‘limited edition’ differs from the popular, classic PARA holster (which is of course still available) in two standout features:

The holster is yellow and, this time, primarily made not from polyester but from tarpaulin!


This impressive holster is designed for expanded on-duty equipment. It offers extra-fast access to infection-protection gloves thanks to the GLOVE-FIX system. The gloves are stored compactly and safely, protected from damage (e.g. from zips).

A knife/multitool compartment with a long hook-and-loop strap, plus three additional pockets on two levels, provide space for medical instruments and useful equipment. The attached additional pocket offers space, for example, for a pager or small items. Two elastic loops on the outside, e.g. for a torch or wooden wedges, round off this well-designed holster.

A duty belt or belt can be threaded through the carrying loops on the back both vertically and horizontally.


Features:
- 1 multitool/knife compartment
- 3 pockets on two levels
- 1 attached additional pocket
- 1 GLOVE-FIX system
- 2 elastic loops
- Carrying loops on the back


Scope of delivery:
Holster without any other accessories shown


Specifications:
- Colour: yellow
- Size: 19.5 x 14 x 2.5 cm
- Weight: 0.09 kg
- Material: tarpaulin, not flame-retardant

In this holster, all essential items of equipment are kept directly on your person. The holster is compact, does not add bulk, and still offers sufficient space for the kit you really need to carry.

The two middle inner compartments are suitable, for example, for holding: large wooden wedges, small torches, rescue knife, marking pens, door marking tape, etc. Two retaining cords (approx. 40 cm long) with carabiner hooks secure the items to prevent loss.

The large, wide inner compartment offers space for a rescue loop sling and HMS carabiner, or alternatively a notepad and ballpoint pen.

The two outer elastic loops can securely hold two wooden wedges or a torch/rescue knife for quick access.

For attachment to a firefighter’s duty belt, breathing apparatus or trouser belt, the holster features two Vario double loops with wide hook-and-loop fasteners.
A large labelling field on the inside of the flap allows permanent identification (e.g. FF Musterstadt 40/1).
The 50 mm wide high-visibility reflective strip provides additional safety.

Features:
- 2 inner compartments (H x W x D): 11 x 5 x 3 cm
- 1 inner compartment (H x W x D): 11 x 10 x 2.5 cm
- 2 removable 3 mm retaining cords: length approx. 40 cm with carabiner hooks
- 2 elastic loops (outside): 5 x 3 cm

Scope of delivery:
Holster without any other accessories shown

Specifications:
- Colour: blue
- Size: 15 x 12.5 x 6 cm
- Weight: 0.12 kg
- Material: 370G TEC Fire Retardant

Multi-cut scissors made of stainless steel for all-round use:
Ropes, straps, webbing, wires, cables etc. can be cut effortlessly with one hand.

Thanks to the side locking catch, the operational scissors can be kept permanently closed.

The scissors can be securely attached via an eyelet with a small key ring, e.g. to the retaining cords of TEE-UU holsters, to prevent loss.

Operational scissors suitable for the holsters:
- MICRO
- PROFI
- MASTER
- MASK


Details
- Cutting length: 40 mm
- Scissors opening: 27 mm


Scope of delivery:
Operational scissors with key ring, without any further accessories or pictured accessories


Specifications:
- Colour: yellow/natural
- Size: 19 x 5 cm
- Weight: 0.1 kg
- Material: stainless steel scissor blades

For training in person search and rescue using a thermal imaging camera.
The THERMO-PADs are designed for use together with the CRASH & CARRY training manikin. Attaching and activating the pads is extremely easy.

Preparation and activation:
The self-adhesive THERMO-PADs can be attached to the CRASH & CARRY training manikin in just a few seconds. A THERMO-PAD is activated automatically by opening the vacuum packaging. The THERMO-PAD reacts with oxygen in the air and, after an activation time of approx. 20 minutes, produces heat radiation that is clearly visible with a thermal imaging camera. The THERMO-PAD heats up to a temperature of approx. 50°C.

Duration of use and disposal:
- At an air temperature of 20°C, an operating time of at least
four hours is achieved.
- After single use, the THERMO-PAD can be disposed of with household waste.

Packaging unit:
10 pcs.

Specifications:
- Colour: white
- Size: 13 cm x 8 cm
- Weight: 0.5 kg (per packaging unit)
- Weight: 0.05 kg (per pad)

The black T-Pod Combat has the same features and the same mechanism of action as the original white/orange T-Pod, but it has been tailored for the military sector—developed specifically for use in tactical emergency medicine. Thanks to its compact pack size, it is ideal where space is limited. For exact dimensions – see additional information.

The T-Pod is a circumferential stabilisation system that achieves pelvic stabilisation and reduces pain. With its quick and effective application, the T-Pod provides rapid initial treatment in critical moments to prevent blood loss and save lives.

Product data:

- Offers a specially developed lacing system for uniform pelvic compression and stabilisation.
- Tightening the pelvic belt is possible effortlessly with one hand.
- Its universal size allows individual use; for a perfect fit it can be easily shortened. For obese patients, 2 belts can be secured together and used.
- Non-metallic fabric belt
- 100% radiolucent, compatible with X-ray, CT and MRI
- Latex-free
- Colour: black

Product details:
The T-POD pelvic sling from Pyng is a quick-to-apply and effective system for stabilising pelvic fractures in trauma patients during initial emergency care. It helps to prevent further injuries during patient transport and to relieve pain.

Product data:

- Complete system: thanks to the special traction system, the T-POD can be used for compression as well as for stabilising the pelvis
- Adjustable: one size that can be used for most patients
- Compatible: 100% radiolucent, suitable for CT and MRI
- Safe: latex-free