Cover for leg positioning splint in white. Available in both jersey fabric and artificial leather. Ideal for the leg positioning splint (item no. 16192-01).

Product data:

Length: 75 cm
Material: jersey fabric or artificial leather
Colour: white

With particularly high-quality, sharp-cutting circular blade. Individually sterile packed.

New design with secure, non-releasable double-lock closure.

Individually sterile in peel pack.

Ring-marked pipettes with 2 graduation marks = double ring mark, not heparinised. Volume 1–5 µl ± 0.30 acc.

Volume 10–200 µl ± 0.25 acc. All pipettes are available in a heparinised version on request.

450 x 630 x 110 mm
Material: High-impact polystyrene

This practical wall-mounted drying rack consists of a large, sturdy, white panel with 72 hooks. The hooks are closed at the front to prevent any contamination. The drainage channel can be connected to the sink using a drain hose. The plug-in hooks can be inserted and are easy to remove, e.g. to hang larger items. This drip tray cannot rust or age. Complete with hanging device, drainage channel and accessories.

Ear indwelling needles
Insulated needle base. Plaster material particularly skin-friendly, breathable and showerproof. Sterile packaging.

White, with lid

So-called “Dellbrück capillaries”, 29 mm long. Self-filling, highest precision and accuracy. Complies with IVD guidelines. 100 pieces per dispenser, 10 x 100 pieces per outer carton.

ESR vacuum tubes
Ready-to-use vacuum tubes for a blood volume of 1.6 ml (+0.4 ml sodium citrate solution already contained in the tube) = 2 ml total volume. The tube stopper can be labelled with a barcode sticker.
Use:
Puncture the vein, slide the tube on. It fills automatically with the correct amount of blood. Shake and place in the ESR rack.
Read after 30 minutes.

The FAP pouch is designed to hold first-aid equipment for traumatic injuries for individual persons and offers enough space for your customised setup. The compact pouch is equipped with MOLLE, can be attached to the side of a tactical vest, and features a hook-and-loop panel for identification.

The FAP is available in 3 colours. Size: 21 x 13.5 x 4.5 cm

Weight: 160 g

Fixed-Volume Micropipette
There are 10 fixed-volume micropipettes covering the range from 5 to 1,000 µl. Particularly handy design, heat-insulated, with tip ejector, incl. accessories so that the user can carry out calibration and repairs themselves.

Bottle equipped with an inner seal and cap, ensuring a perfect leak-tight seal. Provided with holes on the bottle shoulder to allow the attachment of security seals or labels. Angled bottle shoulder for easier, complete emptying of the bottle.

50 ml = Ø 40 mm / H: 77 mm / Opening Ø 24 mm / Graduation 10 ml

100 ml = Ø 48 mm / H: 89 mm / Opening Ø 24 mm / Graduation 20 ml

250 ml = Ø 61 mm / H: 126 mm / Opening Ø 34.5 mm / Graduation 25 ml

500 ml = Ø 75 mm / H: 158 mm / Opening Ø 34.5 mm / Graduation 50 ml

1000 ml = Ø 93 mm / H: 200 mm / Opening Ø 45 mm / Graduation 100 ml

2000 ml = Ø 115 mm / H: 247 mm / Opening Ø 45 mm / Graduation 100 ml

Product data:

Material:

Polyethylene (body)
Polypropylene (closure)

19 cm long, made of soft plastic with rounded nubs.

The handy and practical inhalation device for regular use at home.
The inhalation device comes in a convenient carry and storage bag, which also contains the accessories and the user manual. The compressor performance will impress you during use. Details and performance features are listed below.

The inhalation device comes with accessories and a user manual and is ready for immediate use. It can be operated continuously for 20 minutes, followed by a 40-minute shut-off period. The scope of delivery includes the nebuliser, mouthpiece, one mask each for children and adults, the tube and the filter. This allows flexible use wherever inhalation provides support and relief for respiratory problems.

Product data:

Voltage: 230 V / 50 Hz

Max. pressure: 220 kPa (2.2 bar / 32 psi)

Max. flow: 13 l/min

Operating pressure: 0.95 bar / 13.8 psi / 95 kPa

Nebulisation: 4.8 l/min

Weight: 1.45 kg

Dimensions: 148 x 114 x 171 mm

Operation: 20 min continuous operation

40 min shut-off time

Noise level: approx. 56 dBA

Never has temperature measurement been easier. The non-contact infrared thermometer Berrcom 178 offers comfort, accuracy and precision when measuring temperature. With the press of a single button, the device determines a person’s temperature immediately and precisely, without the risk of contamination. Simply aim the thermometer at the patient’s forehead, press the trigger button and the reading is displayed instantly. Readings can be shown in either Celsius or Fahrenheit. Colour-coded fever warning indicator (green/orange/red) and integrated audible alarm if the measured body temperature exceeds 38 °C (100.4 °F). Three selectable temperature measurement modes: body, room and surface temperature. Scope of delivery: batteries not included.

Product features

• Durable sensor (approx. 100,000 measurements without recalibration)
• Hygienic and easy to use, no cross-contamination
• Response time: 1 second
• Temperature display resolution: 0.1 °C (0.1 °F)
• Colour-coded fever warning indicator
• Integrated audible alarm
• Suitable for newborns and adults
• Automatic switch-off: < 30 seconds
• Measurement memory: for 32 measurements

Technical data:

Measuring distance: 3 cm ~ 5 cm (1.2 in ~ 2 in)

Measuring range

Body mode: 32 °C ~ 42.9 °C (89.6 °F ~ 109.2 °F)
Surface temperature mode: 0 °C ~ 60 °C (32 °F ~ 140 °F)
Room mode: 0 °C ~ 40 °C (32 °F ~ 104 °F)

Accuracy:
32.0 °C ~ 34.9 °C (89.6 °F ~ 94.8 °F) ±0.3 °C (±0.6 °F)
35.0 °C ~ 42.0 °C (95 °F ~ 107.6 °F) ±0.2 °C (±0.4 °F)
42.1 °C ~ 42.9 °C (107.8 °F ~ 109.2 °F) ±0.3 °C (±0.6 °F)

Power supply: 2 x 1.5 V AA
Ambient temperature: 10 °C ~ 40 °C (50 °F ~ 104 °F)
Relative humidity: ≤ 85%
Dimensions: 187 x 120 x 57 mm (L x W x H)
Weight (without batteries): 80 g

This stainless-steel kidney dish can be used to collect instruments after treatments. It is also ideal for catching vomit, e.g. during impression taking in a dental practice. The stainless-steel kidney dish can be disinfected and sterilised and, after reprocessing, can be used to lay out instruments.

Product data:

- Individually packed in a poly bag
- 25 cm long, heavy-duty design
- Volume = approx. 500 ml

Product data:

• Examination light with central reflector for long-term economical use in hospitals and medical practices

• The new LED light source, in combination with a specially developed reflector, ensures focused illumination

• Maintenance-free thanks to an extended light source service life of up to 30,000 h

• Very low heat generation due to the double-walled lamp head housing and integrated ventilation slots on the lamp head Colour: white

Light source: LED central reflector 18 V / 12 W

Light output: approx. 55,000 lux (at 0.5 m distance)

approx. 12,750 lux (at 1.0 m distance)

Light field Ø: approx. 100 mm (at 0.5 m distance)

approx. 200 mm (at 1.0 m distance)

Colour temperature: approx. 4,300 Kelvin ± 200 For ceiling height 2.70 m

Material: PMP

Complies with ISO 7056-1981 (E) and BS 5404 Part 1.
Crystal-clear quality.
Autoclavable, short-term up to 150 °C.
The permanently embossed graduation is abrasion-resistant.
Impeccable chemical properties.

25 ml = Outer Ø 35 mm / H: 50 mm / Wall thickness Ø 1.5 mm / Tolerance ± 10% / Graduation 1 ml

50 ml = Outer Ø 42 mm / H: 60 mm / Wall thickness Ø 1.5 mm / Tolerance ± 10% / Graduation 2 ml

100 ml = Outer Ø 52 mm / H: 70 mm / Wall thickness Ø 1.5 mm / Tolerance ± 10% / Graduation 5 ml

250 ml = Outer Ø 70 mm / H: 95 mm / Wall thickness Ø 2 mm / Tolerance ± 10% / Graduation 10 ml

500 ml = Outer Ø 90 mm / H: 120 mm / Wall thickness Ø 2 mm / Tolerance ± 10% / Graduation 10 ml

1000 ml = Outer Ø 110 mm / H: 145 mm / Wall thickness Ø 2 mm / Tolerance ± 10% / Graduation 20 ml

2000 ml = Outer Ø 135 mm / H: 185 mm / Wall thickness Ø 2 mm / Tolerance ± 10% / Graduation 50 ml

3000 ml = Outer Ø 160 mm / H: 200 mm / Wall thickness Ø 2.5 mm / Tolerance ± 10% / Graduation 500 ml

5000 ml = Outer Ø 190 mm / H: 230 mm / Wall thickness Ø 2.5 mm / Tolerance ± 10% / Graduation 500 ml