The item is designed life-size. The brain can be removed separately and is divided into the left and right hemispheres. It provides a detailed representation of the anatomy of the neck, including the superficial structures of the neck, the anterior cervical region and the sternocleidomastoid region, the lateral cervical region, the root of the neck, the cervical fascia and the fascial spaces. Building on this, the anatomy of the brain and face is shown, and the relationships between the head, face and neck are described in greater detail.

Head and Neck Phantom for CT, X-ray and Radiotherapy
This phantom is created from real patient data and manufactured using the latest technology. Bone, vessels and soft tissue are reproduced authentically, with realistic CT values for all tissues at a tube voltage of 120 kVp in CT. If the phantom is to be used primarily at other tube voltages (e.g. 100 kVp), the calibration of the CT values can be adjusted accordingly on request. The phantom provides realistic tissue contrasts in X-ray imaging. Air spaces are filled with a material of approximately -80 Hounsfield units.
The head phantom provides an extremely realistic simulation of a head and neck CT angiography (with arterial contrast enhancement) of a patient with an arteriovenous malformation on the right side. The phantom is supplied at true-to-scale size and includes the cervical spine up to the base plate of the fifth cervical vertebra.

Product details:

Size: 19 x 23 x 27 cm

This head cover can be easily pulled over the head of the Standard or Basic nursing manikin, Clinical Chloe or Advanced Clinical Chloe, transforming the standard nursing manikin into a manikin with a geriatric appearance. The soft skin looks lifelike and feels realistic. The mouth, nose, ears and tracheostomy opening remain accessible, ensuring the manikin’s functions are fully retained. The mask features a zip at the back of the head, allowing it to be fitted and removed easily.

Head with pharynx and larynx"
This life-size model is divided into two halves in the sagittal plane.
It shows the details of the nasal and oral cavity, the larynx and the pharynx. From the rear and from the side, the entire pharyngeal musculature can be seen.
With stand.

Product details:

Size: 15 x 15 x 30 cm
Weight: approx. 0.8 kg

Heart model, 2-part with cardiac conduction system
The front wall of this heart model can be removed, providing a view of the internal structures. All key structures such as the atria, ventricles, and the aortic, mitral, pulmonary and tricuspid valves are shown. Heart muscle, adipose tissue, arteries and veins are detailed and hand-painted; the cardiac conduction system is shown in colour. The model is made from unbreakable plastic and is mounted on a base, removable from the base.

Product details:

Size: 8 x 8 x 14 cm
Weight: 0.4 kg

Heart model, life-size, 2 parts - EZ Augmented Anatomy
The front wall of this heart model can be removed, revealing the internal structures. All key structures are shown, including the atria, ventricles, and the aortic, mitral, pulmonary and tricuspid valves. Heart muscle, adipose tissue, arteries and veins are hand-painted in detail; the structures are described on the attachable learning card (German/English). The model is made of unbreakable plastic and is mounted on a base, removable.

Product details:

Size: 8 x 8 x 14 cm
Weight: 0.4 kg

Haemorrhoid model, 2x size
This illustrative model for patient education shows, at 2x size, a frontal section through the rectum. The base also features a slightly reduced relief illustration. The model shows haemorrhoids in stages I and II. The additional relief model shows haemorrhoids in stages III and IV. The anatomical structures of the rectum, such as the sphincter muscles, mucosa and venous vascular plexus, are also visible.

Product details:

Size: 17 x 12 x 10 cm

Hip Implant Model
This highly illustrative model includes three reduced-scale hip models. In addition to a healthy hip, the model shows a diseased hip as well as a hip with an implant. All three models are mounted with movable joints; pelvis and femur can be separated, and the implant can be removed from the bone. Supplied on a removable plexiglass stand.

Product details:

Size: 34 x 12 x 19 cm
Weight: 1.1 kg

Natural cast of a human hip joint. The femoral stump is held in the hip joint by the ligament apparatus. The ligament apparatus with the iliofemoral ligament, ischiofemoral ligament and pubofemoral ligament allows the movements in the hip joint to be demonstrated: flexion and retroversion (extension), abduction and adduction, and to a certain extent also external and internal rotation. With removable stand.

This model of a stallion’s hoof was derived from CT and MRI data, is anatomically accurate and life-size. Manufactured using full-colour 3D printing, each anatomical structure is shown in a different colour. The hoof capsule is available separately and can be attached to the standing limb. Four models are available: from the complete anatomy, composed of 25 coloured structures, through to progressively reduced models in which deeper structures are visible.


Hoof capsule:


The hoof capsule matching the models is available separately and can be attached to the standing limb.

The large, narrow horse skull has long, broad, tapering nasal bones. At the front of the mouth are large incisors, made for cutting grass. At the back of the mouth there are six large, rectangular molars on each side of the upper and lower jaw. The area between the incisors and the cheek teeth is called the diastema. In this gap sits a canine tooth (stallion tooth, not present in all horses). The eye sockets are located far back on the skull, typical of grazing animals. The cranial cavity is small. The original specimen for this replica was a large retired police horse. The skull is in two parts (separate skull and lower jaw).

Product details:

Size: 51 x 54 x 30 cm

This two-layer muscle pad allows realistic training of intramuscular injections in small animals. The lifelike skin surface simulates the soft skin of a dog or cat in texture and feel. Small injection volumes can be administered into the pad, allowing different injection angles and depths to be practised. The skin-like surface closes again after injection and enables multiple injections.

The trainer includes a holder with suction cups to ensure a secure grip on the table.

Animals, too, have nerve cells that signal pain or discomfort, and receiving an injection from a trained medical professional makes a big difference for pets as well. Now you can practise and become more skilled at injecting with the improved subcutaneous and intramuscular injection pad. Gaining hands-on experience may help to refine motor clinical skills, but ideally it is about providing better emergency care to an injured animal. This trainer includes an even more realistic pad that simulates dog skin and muscle tissue and has a hard plastic base.

The dimensions of the SC/IM injection pad are: approx. 7.5 x 12.7 x 3.2 cm

Ingrown Toenail Simulator (Set of 3)
The Ingrown Toenail Simulator from SurgiReal was developed to provide more appropriate and more realistic models for learning wedge resections and nail extractions. This small but impressive model includes a simulated bone structure with internal cavities for performing digital nerve blocks. The nail is “ingrown” on both sides, allowing the procedure to be practised more than once. This model replicates the shape and characteristics of a human toe as well as the most common form of onychocryptosis (ingrown toenail).

Injection Arm for R10052
This well-known i.v. injection arm is available in a version that can be attached to the right shoulder joint of model R10052. It features realistic PVC skin and latex veins, so that the skin actually creases when the vein is palpated, and when the needle enters the vein, the characteristic “pop” can be felt. With correct insertion, there is realistic flashback. The arm can be rotated at the elbow, allowing easy access to the antecubital fossa, forearm and back of the hand. A bony landmark at the shoulder helps identify muscle tissue for intramuscular injections.

Weight: 5 kg

Injection Abdomen
This soft abdominal replica is an invaluable aid for explaining to patients the correct injection technique and rotation of the injection site while avoiding the 5 cm area around the navel, as well as for practising self-injection with a wide range of syringe types, including pen-type injectors. The trainer has lifelike skin that feels as if real abdominal tissue lies underneath. The model has a soft plastic back to prevent needles from passing through, as well as holes that allow air circulation and drying if you wish to inject liquid. You can inject distilled water; however, the more you inject, the longer the model will take to dry. Real insulin should not be used, as this could damage the plastics. The injection abdomen is designed as a consumable item; with proper care and handling, it can be used for a long time. Using the smallest possible needle and rotating the injection site significantly extends the service life of the model.

Product details:

- Size: 25.4 x 15.3 x 3.2 cm
- Weight: 0.4 kg

Intramuscular training model
A simple and affordable model for learning the basics of intramuscular injection. Made of soft, tissue-like material. The model can be injected repeatedly. For use without liquid.

Life-size newborn with the option of intubation and bag-valve ventilation as well as chest compressions.

The model has the following features
- Use of tracheal tubes or laryngeal masks
- Detection of unilateral ventilation in the event of intubation that is too deep
- Mask ventilation
- Oral and nasal suctioning
- Chest compressions
- Umbilical catheterisation
- Umbilical cord pulse (manual)