Skip to Content
  1. Products
  2. Laboratory Supplies

Laboratory Supplies

Numerous different devices and consumables are used in laboratories. Especially in medical diagnostics and therapies, laboratory tests are an essential part to detect and treat diseases at an early stage. To ensure that the daily routine of the practice can take place according to regulations, a medical laboratory must be fully equipped at all times. In our online store, we offer you everything you need in terms of laboratory equipment and consumables for clinics and medical practices. From the technical equipment of the laboratory to laboratory-specific consumables, you will find everything you need in terms of equipment and laboratory accessories.
Basis Preisliste Netto
Sort By: Featured
EURONDA Replacement cartridges for AQUAFILTER 3G
Mixed-bed resin (replacement filter cartridges for water filtration system)
()
61.61 € 61.61 EUR
GLUCOJECT Lancets Plus 33 G
The Glucoject Lancets PLUS 33G have a standardised shape and fit most common lancing devices.

New very thin needle

Triple-bevel stainless steel needle tip

Silicone-coated needle

More accurate puncture with less skin irritation
()
From 6.79 € 0.0 EUR
GLUCOMEN Areo Sensor Test strips
Test strips for self-monitoring of blood glucose with the GlucoMen® areo meter. Particularly wide and easy-to-grip test strips.

Do not store the test strips outside the container.

Intended for self-testing.

Close the container immediately after use.
()
From 21.73 € 0.0 EUR
HARTMANN Cotton swabs non-sterile, made of polypropylene, 11 mm Ø, with large cotton head
Available in various versions to meet a wide range of requirements; supplied in sterile and non-sterile designs with different-sized cotton heads, made of wood or polypropylene, with the polypropylene sticks offering a certain degree of flexibility.
Non-sterile cotton swabs made of wood with a small cotton head or made of polypropylene with a large cotton head

Application:

For wound and oral care, e.g. for the targeted application of ointments or liquid substances, for cleaning, etc. Do not insert into the respiratory tract.
()
4.78 € 4.78 EUR
HARTMANN Cotton swabs sterile, made of polypropylene, 10-11 mm Ø, with large cotton head
Available in various versions to meet a wide range of requirements; supplied in sterile or non-sterile form with different sizes of cotton tip, made of wood or polypropylene, with polypropylene sticks offering a certain degree of flexibility.
Sterile, blister-packed and sealed in packs of 2; particularly suitable for external wound cleansing and care, and also for laboratory work where sterility is required.

Application:

For wound and oral care, e.g. for the targeted application of ointments or liquid substances, for cleaning, etc. Do not insert into the respiratory tract.
()
66.79 € 66.79 EUR
HARTMANN Foliodrape OP adhesive strips
Elastic adhesive strips coated with polyacrylate adhesive.

Application:

For quick and secure fastening of cloths, tubes, cables, etc.
()
60.14 € 60.14 EUR
Hawodent Heat sealer HD 260MS
For sterile goods packaging in medical practices and laboratories in accordance with DIN 589537.

Impulse heat sealers for sealing transparent pouches and tubing in medical and dental practices as well as tattoo and piercing studios. The devices comply with the guidelines of the Robert Koch Institute (RKI).

The hd 260 MS sealer, with its adjustable sealing time, is suitable for packaging sealable pouches and tubing as well as thermoplastic films. They are ideal for use in tattoo studios and smaller medical facilities where no critical medical devices are used as intended.

Product data:

- Automatic temperature control with electronic sealing time automatic function, continuously adjustable.
- Audible sealing time signal and indicator light.
- No warm-up time.
- Optional add-on table available.
- Dimensions: 420 x 300 x 220 mm
- Seal seam width: 8 mm, smooth
- Power: 870 VA
- Max. film width: 250 mm
()
597.38 € 597.38 EUR
HEMOCUE Cleaner 1 x 5 pieces
The HemoCue® Cleaner is used for cleaning all HemoCue® analysers.
The lint-free, highly absorbent cleaner is impregnated with cleaning solution.

Materials:
Polyvinyl acetate sponge, with a cleaning solution.

The following device types can be cleaned with this item:
- HemoCue® Hb 201+ Analyser
- HemoCue® Hb 301 Analyser
- HemoCue® Hb 201 DM Analyser
- HemoCue® 201 DM RT Analyser
- HemoCue® Plasma/Low Hb Photometer
- HemoCue® Glucose 201+ Analyser
- HemoCue® Glucose 201 RT Analyser
- HemoCue® Glucose 201 DM Analyser
- HemoCue® Glucose 201 DM RT Analyser
- HemoCue® Albumin 201 Analyser
- HemoCue® Urine Albumin

Shelf life:
Usually 15–17 months
()
18.39 € 18.39 EUR
HETTICH EBA 200 Benchtop centrifuge with angle rotor
EBA 200 benchtop centrifuge with angle rotor – expected to be available from July 2014 –
Practical small centrifuge, complete with 8-place angle rotor 8 x 15 ml, for low sample throughput, lid locking and lid holding, max. speed: 6,000 min-1, max. RCF: 3,461, frequency drive (without carbon brushes), LCD display, imbalance shut-off, pulse button for brief spin-down, one-hand lid closure
()
1,424.43 € 1424.43 EUR
HETTICH EBA 200 S Benchtop centrifuge with angle rotor
The EBA 200 S is a powerful small centrifuge for low sample throughput. The centrifuge is equipped as standard with an 8-place angle rotor for holding tubes with a volume of up to 15 ml.

With a maximum RCF of 6,153, this centrifuge is primarily used wherever every minute counts. Its high performance makes the EBA 200 S the ideal device for a hospital’s emergency department. It enables you to process S.T.A.T. samples (emergency samples, short turn-around time) without delay. After just a few minutes, plasma or serum is ready for analysis.

Thanks to its ability to accommodate many different tube types, the centrifuge is extremely versatile. Adapters for various additional vessel types are available on request.
()
2,365.13 € 2365.13 EUR
HETTICH EBA 270 Small centrifuge, 208-240 V with swing-out rotor
EBA 270 small centrifuge, 208-240 V with swing-out rotor
Practical small centrifuge, complete with 6-place swing-out rotor and 6 sleeves each 2331 and 2333, for optimal preparation of 15 ml sample tubes with separator gel, max. speed: 4,000 min-1, max. RCF: 2,254, with microprocessor control, metal lid lock, lid locking and lid hold-down, pulse button for short spin-down, lid opening at the touch of a button. - Dimensions (H x W x D): 239 x 326 x 389 mm - Weight: approx. 13 kg
()
1,727.88 € 1727.88 EUR
HETTICH Swing-out rotor for 4 x 15 ml for HET 1011
Swing-out rotor for 4 x 15 ml for HET 1011
max. length x Ø: 17 x 125 mm, for numerous common sample tubes, including round-bottom tubes, up to 15 ml
()
152.99 € 152.99 EUR
HITADO HITADokkult
ATTENTION: Sale only to medical device resellers, physicians and authorities! Test for professional use only!
Immunological test for the detection of human blood from stool samples for colorectal cancer screening and early detection. The test detects even the smallest amounts of occult blood and provides more accurate and reliable results than guaiac tests. Incl. stool catcher and patient information leaflet.
()
45.45 € 45.45 EUR
KERN Coaxial microscope OZC-5 Trinocular
Coaxial with parallel optics for excellent contrast and depth of field

- The KERN OZC-5 series has been specifically developed for requirements demanding high contrast and depth of field. These instruments are indispensable especially for the LCD/LED electronics industry
- The coaxial 2 W LED incident light illumination integrated in the objective ensures pinpoint depth of field, enabling even deeper sections (e.g. the bottom of a drilled hole) to be captured[/]
- The parallel optics are the highest-quality optical system and deliver excellent images with optimum contrast, colour and depth of field for fatigue-free work. Refocusing when changing zoom magnification is also required only to a very small extent
- The large adjustable magnification range from 18x to 65x allows stepless zooming during your work
- The models of the KERN OZC-5 series are supplied as trinocular versions as standard and are therefore prepared for connecting a camera for documentation and quality reports
- The mechanical stand allows precise adjustment and focusing of your sample. The base is particularly heavy-duty and therefore offers a high level of stability and secure footing[/]
- A wide selection of eyepieces and a mechanical stage attachment are available as accessories
- A dust cover, eyecups, as well as multilingual operating instructions are included in the scope of delivery
- A C-mount adapter is required for connecting a camera; this must be selected from the following model configuration list

Areas of application:
LCD/LED electronics, semiconductor technology

Applications/samples:
Specimens with focus on a spatial impression (depth, thickness), zoom for variable magnification, e.g. LCD/LED electronics, printed circuit boards, ICs

Technical data
- Optical system: parallel optics
- Illumination: dimmable 2 W LED (coaxial) (reflected)
- Tube inclined at 45°
- Magnification ratio: 3.6:1
- Beam path distribution: 50:50
- Interpupillary distance: 52.0–76.0 mm
- Objective zoom: 1.8x – 6.5x
- Dioptre adjustment on both sides
- Overall dimensions W×D×H 305×180×405 mm
- Net weight approx. 11.33 kg
()
963.90 € 963.9 EUR
KERN Double gooseneck illumination
Double swan-neck light (EU version)
6 W LED; 5600–6300 K; 300 mm
()
176.72 € 176.72 EUR
KERN Eyepiece HWF 10 x / Ø 22mm
Eyepiece HWF 10x / Ø 22 mm
with 0.1 mm scale, anti-fungus
()
139.23 € 139.23 EUR
KERN Eyepiece SWF 15 x / Ø 17mm with Anti-Fungus
Eyepiece SWF 15x / Ø 17 mm with anti-fungus coating
()
80.33 € 80.33 EUR
KERN Stereo zoom microscope OZL-45R Binocular
- The KERN OZL-45R stereo zoom microscope series impresses with its very good optical performance, easy operation and integrated LED ring illumination.
- A highlight of the KERN OZL-45R is the powerful integrated LED ring light in the objective housing, continuously dimmable, which ensures uniform, shadow-free illumination. In addition, an LED transmitted-light unit is included.
- Thanks to the built-in quality optics and the powerful integrated LED illumination, this model is a particularly versatile all-rounder for all areas of application.
- The zoom objective allows continuous magnification from 7.5× to 50×.
- As standard, the KERN OZL-45R series is equipped in the binocular version with 10× eyepieces with a field of view of 23.0 mm diameter.
- The mechanical stand provides plenty of working space as well as precise focusing mechanics.
- A wide range of eyepieces and auxiliary objectives is available as accessories.
- A dust cover, eyecups and a multilingual operating manual are included in the scope of delivery.

Technical data:
Field of view: Ø 33.0 mm – 5.0 mm
Eyepiece: HSWF 10× Ø 23.0 mm
Optical system: Greenough optics
Incident light illumination dimmable
Tube inclined 45° (binocular)
Zoom ratio: 6.7:1
Interpupillary distance: 55.0–75.0 mm
Dioptre adjustment on both sides
Overall dimensions W×D×H 320×275×420 mm
Net weight approx. 4.585 kg
()
931.77 € 931.77 EUR