Emergency

Unique and rethinking the holster concept – the CARGO pocket holster brings order to the thigh pocket of service trousers.

For deployment areas with special requirements, the CARGO is also available in the CARGO TACTICAL version in completely black.

Pens, pupil torch, disposable gloves and more can be stored in the holster’s elastic loops and are within reach in seconds.

For items such as trauma shears, the CARGO is equipped with a puncture-resistant slip-in compartment.

Infinitely adjustable in length, it can be adapted to the pocket depth of the respective trousers in just a few easy steps. This prevents the holster from disappearing into the “depths of the thigh pocket”, while still remaining largely invisible from the outside. Using the elastic pull loop at the top, the entire holster can be easily pulled back out of the thigh pocket.


Features:
- 8 elastic loops in various sizes, inside, including:
- 1 with puncture-resistant slip-in compartment for e.g.
trauma shears
- 2 large elastic loops on the outside on the back
- 2 small elastic loops on the outside on the sides
- elastic pull loop for removing the holster
- 2 wide, reinforced hook-and-loop strips for adjusting the holster height
- 2 hook-and-loop strips for reducing the height of the inner compartments


Scope of delivery:
Holster without additional accessories


Specifications:
Colours: grey, black
Size (W x H x D): 12.5 x 14 x 5.5 cm
Max. size (W x H x D): 17 x 19 x 5.5 cm
Weight: 150 g
Material: 150D polyester

For marking searched rooms or corridors.
The 30 cm-long CHECKER STRAP can be quickly attached to almost any type of door handle thanks to the cord stopper, without the need for complicated knotting, and offers a 100% secure hold even during positive-pressure ventilation.
The 12 mm wide strap, with its signal yellow colour and 8 mm continuous reflective stripe, is clearly visible even in smoke-filled rooms.

Pack size: 5 door marking straps per pack

The CHECKER door marking straps are ideal for use with the CHECKER POUCH cuff!

Details on use are compiled in the Service section:
Use of CHECKER POUCH

Scope of delivery:
without any additional accessories!

Specifications:
- Colour: yellow/silver
- Size: 30 cm x 1.2 cm
- Weight: 0.02 kg
- Material: 95% polypropylene, 5% nylon

With every reach, a door marking strap ready to hand, intuitive and reliable – that’s what defines the CHECKER POUCH sleeve.

A total of ten marking straps fit into the CHECKER POUCH. Each strap is neatly held in elastic loops inside the sleeve, and only the easy-to-grip cord stoppers are on the outside.

Each strap can be removed easily, individually by pulling on the cord stopper – in any order and in any pulling direction.

The sleeve itself is either worn on the arm over the protective jacket with its long Velcro fastener for a precise fit, or it can be attached with a carabiner to a belt or equipment loop.

The CHECKER POUCH sleeve is the ideal aid for door marking, allowing the marking straps to be removed easily even while wearing protective gloves!

Features:
- 10 slots for CHECKER STRAP
door marking straps (9861-2508)
- internal elastic loops for stowing
the marking straps and protection against
the straps getting tangled with each other
- 2 long Velcro strips for a precise fit on the arm
- 2 metal eyelets for attachment with a carabiner
to belt or jacket

Scope of delivery:
Sleeve, empty and without any other accessories shown


Specifications:
- Colour: blue
- Size: 42 x 11 x 2 cm
- Weight: 0.16 kg
- Material: 370G TEC Fire Retardant

The rope bag from the field – for the field!

It is well known that the functionality and carrying method of the fire service rope bag to DIN 14922 is not optimal.
To work with maximum safety and efficiency, the breathing apparatus team needs more than just a single fire service line for interior attack – as recommended in FwDV 1. The KOMBI rope bag offers a leak-proof compartment for the standardised 30 m fire service rope to DIN.
The zippered base compartment provides space for additional rescue equipment for quick access.
The KOMBI rope bag can be worn as a hip bag at the front on the abdomen or at the side. The dual carrying strap, which opens on both sides and is infinitely adjustable, also enables the classic carrying method over the shoulder next to the breathing apparatus.
Additional holsters, e.g. for an emergency smoke hood, can be attached to the external fixing loops.

The reflective FEUERWEHR lettering and safety reflective strips at both ends provide additional visibility.

Features:
Rope compartment (40 x Ø 14 cm) with plastic carabiner on the compartment base to secure the rope end
Zippered base compartment (8 x Ø 14 cm) for rescue equipment:
- 2 retaining cords, each 40 cm long, with snap hooks
- elastic holders for sling & HMS carabiner
- holders for wedges
Labelling field in the lid for permanent identification
external fixing loop for the carabiner of the fire service rope
fixing loops for variable attachment of TEE-UU holsters
50 mm high-visibility reflective strip running all the way around on both sides
reflective FEUERWEHR lettering on the front
25 mm dual carrying strap, opens on both sides and is infinitely adjustable (usable length: 150 cm)

Scope of delivery:
Rope bag with “Feuerwehr” print incl. carrying strap and retaining cords, without any other accessories or the accessories shown

Product data:

Colour: blue
Weight: approx. 350 g
Dimensions: 48 x 14 cm
Material: 370G TEC Fire Retardant

The CRASH & CARRY training dummy is perfect for organising training exercises for the fire service, ambulance service and the Federal Agency for Technical Relief (THW).

Anyone who has ever prepared an exercise knows the problem: having to carry a training dummy on your own is virtually impossible, or at least involves an exhausting feat of strength.

This is where the CRASH & CARRY training dummy from TEE-UU shows its strength: the integrated, stowable carry system allows the dummy to be carried easily as a rucksack. Using two adjustable straps and robust metal buckles, the legs can also be secured to the dummy’s shoulder during transport. If there are two of you, the training dummy can be carried on the two straps like a travel bag.


Variable positioning:

On the head, torso and limbs of the training dummy, there are hook-and-loop (Velcro) loop panels on both sides for attaching injury patterns. Alternatively, ready-to-use laminated injury pattern cards fitted with Velcro strips can be ordered as accessories.

The design of the neck and head area is also suitable for applying a cervical collar or for practising motorcycle helmet removal.

Self-adhesive THERMO-PADs are also available for search exercises using a thermal imaging camera. Once activated, the THERMO-PADs provide a heat source sufficient for at least 4 hours.

The 170 cm CRASH & CARRY training dummy is filled by the user via a zip, individually up to a weight of 40 kg. A total weight of 25–35 kg is sufficient for a realistic training scenario and does not place unnecessary strain on the responders.


Tip for filling the training dummy:
For filling, we recommend, for example, fabric scraps or old clothing, such as heavy denim. By adding weights or stones wrapped individually in rags, the weight can be increased locally and as required.


Material information:
The 1680D TEC polyester fabric used for the CRASH & CARRY training dummy, with a 2 mm HighDurable PVC inner coating, ensures a long product service life when handled appropriately for “patient-safe” use.


Scope of delivery:
Training dummy without filling

Specifications:
- Colour: black
- Size (W x H x D): 70 x 170 x 22 cm
- Weight: 2 kg
- Material: 100% polyester

The CRASH JUNIOR training manikin is ideal for depicting training exercises and accident scenarios involving children.

Together with the large CRASH & CARRY training manikin, these two manikins can be used to cover a wide range of training and exercise scenarios.

On the head, torso and limbs of the training manikin there are hook-and-loop (loop) panels on both sides for attaching injury patterns with Velcro.

Alternatively, ready-to-use laminated children’s injury pattern cards fitted with Velcro strips can be ordered as accessories.

For search exercises using a thermal imaging camera, self-adhesive THERMO-PADs are also available. Once activated, the THERMO-PADs provide a sufficient heat source for at least 4 hours.

The 110 cm CRASH JUNIOR training manikin is filled individually by the user via a zip. A total weight of 15–20 kg is sufficient for a realistic training scenario and remains within the weight range expected for a child.

Tip for filling the training manikin:
For filling, we recommend, for example, fabric offcuts or old clothes, such as heavy denim. By adding weights or stones wrapped individually in rags, the weight can be increased locally and as required.

Material information:
The 1680D TEC polyester fabric used for the CRASH JUNIOR training manikin, with 2 mm HighDurable PVC inner coating, allows a long product service life when handled in a “patient-appropriate” manner.

Equipment:
- Loop panels for attaching injury patterns
- Unfilled weight: 0.75 kg
- Fill weight: individual, depending on filling material

Specifications:
- Colour: black
- Size (W x H x D): 50 x 110 x 17 cm
- Weight (unfilled): approx. 750 g
- Material: 1680D TEC polyester with 2 mm HighDurable PVC inner coating

Pear-shaped aluminium karabiner with triple-action gate locking in accordance with FwDV 1.

Suitable and approved for installation in the safety chain for rescue and self-rescue, e.g. when using the Italian hitch belay (HMS) and when deploying the fall arrest equipment kit.

Features:

- Breaking load:
- major axis: 23 kN
- minor axis: 8 kN
- gate open: 9 kN
- Gate opening: 22 mm
- Catch-free locking system
- Certified to EN 362.

Scope of delivery:
Karabiner without any additional accessories or illustrated accessories

Specifications:
- Colour: natural
- Size: 11 x 7 cm
- Weight: 0.1 kg
- Material: aluminium

The CT HMS Screw Karabiner is a pear-shaped aluminium carabiner with a classic screwgate.

Suitable and approved for integration into the belay chain for rescue and self-rescue,
e.g. when using an Italian hitch belay (HMS).

Features:

- Breaking load
- major axis: 23 kN
- minor axis: 10 kN
- gate open: 9 kN
- Gate opening: 23 mm
- Catch-Free locking system
- certified to EN 362


Scope of delivery:
Carabiner without any additional accessories or illustrated items


Specifications:
- Colour: natural
- Size: 11 x 7 cm
- Weight: 0.07 kg
- Material: aluminium

Whether personal protective clothing or specialist equipment: the 50-litre EQUIBAG offers plenty of space!

When transporting equipment in a service vehicle or private car, it must be stowed neatly so that, firstly, it is quickly to hand and, secondly, it does not “fly” around inside the vehicle.

The 50-litre EQUIBAG provides space for, for example, a complete set of personal protective equipment (PPE).
Boots go into the hygienically sealed Vario side compartment so that the contents of the main compartment always remain clean.

The EQUIBAG also offers space for a wide range of other applications, such as:
- NBC protective suit type 2
- Chainsaw PPE (cut-resistant clothing, helmet, etc.)
- Fall-arrest equipment set (harness, rope, helmet, etc.)
- Transport of protective clothing for certain
senior command ranks in a private car
- Transport of protective clothing when attending
courses at fire service schools
- etc.

There is an adjustable elastic cord on the lid, e.g. for an additional jacket or damp clothing.
The removable 50 mm high safety stripe (38 cm) provides additional visibility. A second reflective and writable identification stripe is included. Pre-printed reflective stripes can be ordered optionally.


Features:
- large main compartment with 50 l capacity with:
- internal zip lid pocket
- Vario side compartment for e.g. boots (extends into the main compartment)
- zip front pocket (25 x 35 x 4 cm)
- side pocket with hook-and-loop fastening (18 x 30 cm)
- padded carry handles
- rucksack carrying system with padded back panel


Scope of delivery:
Bag without any other accessories shown.


Specifications:
- Colour: black/red
- Size: 42 x 41 x 30 cm
- Volume: approx. 50 litres
- Weight: 1.1 kg
- Material: 600D polyester

The safety team bag – an essential part of the equipment for the safety team during breathing apparatus operations!

For the safety team, it has become an indispensable aid for carrying critical equipment in an emergency to rescue an injured colleague or a third person.

The GEARBAG PRO goes beyond these requirements with its features!

The generous interior space offers plenty of room for extensive equipment, depending on a fire brigade’s individual emergency concept.

A complete compressed air breathing apparatus fits into the main compartment with a capacity of 55 litres, and additional accessories can be stored in the internal mesh pockets.

On one outer side, the bag is equipped with a holder for a fire axe or the Halligan tool. Because whatever is attached to the bag doesn’t have to be carried separately!

The extra quick-access mask compartment has space for the essential equipment required for breathing air supply: breathing mask, demand valve and the handle of the cylinder valve of the compressed air breathing apparatus – compact and in one place.

In addition, the bag features an integrated strap system that allows the bag to be secured to a colleague in distress if required, ensuring that the breathing air supply remains secured even during rescue.

The robust trolley system, combined with durable aluminium die-cast wheels and glide rails on the base, allows easy transport by a single responder without significant effort – even over stairs.

For securing the retreat route, the KOMBI line pouch can be mounted on the GEARBAG PRO.

Equipment:
- Main compartment (approx. 55 litres) with:
- 3-point strap, e.g. for securing the breathing apparatus
- quick-access lid compartment, e.g. for a rescue sheet
- side mesh pockets
- Mask compartment (approx. 15 litres) with:
- space for breathing mask, demand valve
- access to the cylinder valve in the main compartment
- 2 side slip pockets, e.g. for rescue shears and a webbing sling
- quick-access lid compartment, e.g. for an escape hood
- lid with one-hand opening for quick access to the compartment
- external holder for fire axe/Halligan tool
- external fastening buckles for KOMBI line pouch
- heavy-duty textile loop at the back, top
- zip outer pocket (W x H: 45 x 19 cm) with
- textile straps of the integrated securing system
- removable yellow hook-and-loop labels on the lid:
- 1x with SICHERHEITSTRUPP print (W x H: 45 x 8 cm)
- 1x without print for individual labelling (W x H: 45 x 8 cm)
- 2 heavy-duty carry handles
- 2 clearly visible, fluorescent yellow handles for one-hand opening of
main compartment and mask compartment
- robust trolley system with:
- aluminium die-cast wheels
- telescopic handle
- glide rails on the underside facilitate movement in a side crawl passage
- all-round padding to protect compressed air breathing apparatus, demand valve
and breathing mask

Scope of delivery:
Safety team bag with integrated trolley system without any additional accessories or illustrated accessories

Specifications:

- Colour: black/yellow
- Dimensions (W x H x D): 77 x 26 x 38 cm
- Weight (empty): 4,700 g
- Material: 1200D polyester

Two problems, one solution: the loss-proof transport of handheld radios and right-angle torches repeatedly poses a challenge for breathing apparatus wearers.

Everyone knows it: lean forward briefly and the radio falls to the ground. During operations, a loss of communication can have fatal consequences.
The HYBRID holster ensures secure transport and optimum accessibility of the devices on the shoulder strap of the breathing apparatus, but also on a belt or duty belt.

Depending on requirements and the operational situation, both device types can be quickly stowed in the holster.

The two elastic loops offer flexible space for wooden wedges or marking pens.

Scope of delivery:
Holster without any additional accessories shown

Specifications:
- Colour: blue
- Size: 19.5 x 9 x 5.5 cm
- Weight: 0.11 kg
- Material: 370G TEC Fire Retardant

The IFAK Radio is a successful combination of a radio harness and a holster for individually assembled first-aid equipment to suit your needs.

The centrally positioned main compartment for emergency equipment can be opened quickly and reliably with one hand by pulling the grab tab at the top. This provides immediate access to the entire kit. The material loops arranged in the lid, on the sides and on the rear panel allow the equipment to be neatly organised. Additional space remains in the centre of the compartment for further items.

In the zipped compartment on the rear, a smartphone, for example, can be safely stored separately from the emergency equipment.

Each of the two side radio holders accommodates one digital radio. To prevent them from falling out, the radios are secured with elastic straps and plastic buckles.

The hook-and-loop area on the top allows easy attachment of individual identification.

To allow the IFAK Radio to be used in special operational areas where neutral equipment without logos or coloured surfaces is required, the TEE-UU logo attached with hook-and-loop can be easily removed.

Thanks to its breathable padding and freely adjustable shoulder straps that cross over the back, the IFAK Radio offers a high level of carrying comfort even during prolonged deployments.


Equipment:
- Main compartment for one-hand opening with:
- 3 individually adjustable equipment holders with elastic strap
on the inside of the lid
- 2 tall elastic loops on each of the two side panels
- 3 elastic loops on the rear panel
- Grab tab for one-hand opening
- 2 external radio holders for digital radios
- Soft hook-and-loop area on top for individual identification
- Zip slip-in compartment on the rear
- TEE-UU logo removable thanks to hook-and-loop fastening
- Breathable padding on the back
- Individually adjustable shoulder straps with a wide adjustment range


Scope of delivery:
Chest rig without any additional or illustrated accessories


Specifications:
- Colour: black
- Size (W x H x D): 21 x 20 x 10 cm
- Weight: 330 g
- Material: 1200D polyester and 3D mesh, not flame-retardant

The INJURY PATTERN SET is the ideal addition to the CRASH & CARRY training manikin!

With the 36 different depiction elements, a wide range of scenarios can be simulated quickly and very easily.

From head injuries, to the torso, right through to the limbs of the CRASH & CARRY training manikin, a wide variety of accidents or conditions can be simulated in seconds.

The basis for the depictions are laminated images, providing permanent protection. These images are simply attached to the training manikin using the Velcro strips fixed on the back.

The set of 36 sheets (up to A4 size) offers the possibility to depict both surgical and internal medicine emergencies.
All images are realistic, professionally made-up depictions and not real injuries.

Scope of delivery:
36-piece set without any additional accessories or illustrated accessories

Specifications:
- Size per injury pattern: max. 30 cm x 21 cm
- Film thickness: 0.125 mm
- Weight: 1 kg

This is ensured by the 4 mm thick, padded compartment with hook-and-loop fastener. A plastic ring on the bottom of the compartment prevents the TEE-LIGHT torch from switching on automatically. Double elastic straps on the sides provide space for spare batteries as well as for pens up to a maximum length of 13 cm.

The holster can be attached to a duty belt, belt or vest using a 25 mm wide loop secured with a metal press stud.

Features:
- Main compartment for torch
- 2 elastic loops
- Belt loop with press-stud security

Scope of delivery:
Holster without any additional accessories or illustrated accessories

Specifications:
- Colour: black
- Size: 16 x 5 x 4 cm
- Weight: approx. 60 g
- Material: 100% polyester, not flame-retardant

The MARKER PEN marking pen is ideal for marking and labelling on almost all surfaces!

The most common fields of use in the fire service are:

- Breathing apparatus operations
e.g. marking searched rooms or areas

- Technical assistance operations
e.g. marking cut and application points for hydraulic rescue equipment, or cordoned-off areas such as airbag zones, etc.

The MARKER PEN writes on virtually all surfaces:
metal, wood, plastic, concrete, rubber, glass and paper.
No matter whether the surfaces are wet, oily, rusty, smooth or rough.

The two different colours (red and yellow) make it possible, for example, to distinguish the markings of two breathing apparatus teams or to delineate cutting and cordoned-off areas.

Optimum operating temperature range: -45°C to +65°C


Scope of delivery:
MARKER PEN in yellow or red, without any additional accessories or illustrated accessories


Specifications:
- available colours: red, yellow
- size: 14 x 2 cm
- weight: 0.04 kg

Extra-large holster for higher demands, specially tailored to the needs of breathing apparatus wearers.
With the MASTER holster, you can carry important items of equipment directly on your body, always within reach and in sufficient quantity.

The two middle inner compartments are suitable, for example, for a torch, rescue shears, an operational knife or marking pens, etc.
Two approx. 40 cm long retaining cords with carabiner hooks secure the equipment against loss.
The large, wide inner compartment offers space for a rescue sling & HMS carabiner, marking pens or door marking tape, notepad, ballpoint pen and much more.
In the four outer elastic loops, wooden wedges can be stored securely for quick access.
The rear Vario double loops allow attachment to a fire service belt, breathing apparatus or trouser belt.

Thanks to its large volume, the MASTER holster is also suitable for use as a technical rescue (THL) holster for equipment at road traffic accidents, etc.

The large labelling field on the inside of the flap allows permanent identification (e.g. FF Musterstadt 40/1).

The 50 mm wide high-visibility reflective strip provides additional safety.

Equipment:
- 2 inner compartments (H x W x D): 15 x 7 x 3 cm
- 1 inner compartment (H x W x D): 15 x 14 x 3 cm
- 2 removable retaining cords (3 mm thick) approx. 40 cm with carabiner hooks
- 4 external elastic loops: 5 x 3 cm
- 50 mm high reflective strip
- Labelling field

Scope of delivery:
Holster without any additional accessories shown

Specifications:
- Colour: blue
- Size: 16 x 14 x 6 cm
- Weight: 0.16 kg
- Material: 95% cotton / 5% meta-aramid, flame-retardant

Convincing holster for extended equipment on duty.

Extra-fast access to infection protection gloves thanks to the GLOVE-FIX system. The gloves are stored compactly and securely, protected from damage (e.g. from a zip).

A knife/multitool compartment with a long hook-and-loop flap as well as three additional compartments on two levels provide space for medical instruments and useful equipment. The attached additional pocket offers space, e.g. for the pager or small items. Two elastic loops on the outside, e.g. for a torch or wooden wedges, complete this well-thought-out holster.

Duty belt or belt can be threaded through the carrying loops on the back both vertically and horizontally.

Equipment:
- 1 multitool/knife compartment
- 3 compartments on two levels
- 1 attached additional pocket
- 1 GLOVE-FIX system
- 2 elastic loops
- Carrying loops on the back

Scope of delivery:
Without any additional accessories shown

Specifications:
- Colour: black
- Size: 19.5 x 14 x 2.5 cm
- Weight: 0.09 kg
- Material: 100% polyester, not flame-retardant

TEE-UU’s bestseller in a limited special edition made from tarpaulin!!

Special – but of course just as functional as you know it:

The ‘limited edition’ differs from the popular, classic PARA holster (which is of course still available) in two standout features:

The holster is yellow and, this time, primarily made not from polyester but from tarpaulin!


This impressive holster is designed for expanded on-duty equipment. It offers extra-fast access to infection-protection gloves thanks to the GLOVE-FIX system. The gloves are stored compactly and safely, protected from damage (e.g. from zips).

A knife/multitool compartment with a long hook-and-loop strap, plus three additional pockets on two levels, provide space for medical instruments and useful equipment. The attached additional pocket offers space, for example, for a pager or small items. Two elastic loops on the outside, e.g. for a torch or wooden wedges, round off this well-designed holster.

A duty belt or belt can be threaded through the carrying loops on the back both vertically and horizontally.


Features:
- 1 multitool/knife compartment
- 3 pockets on two levels
- 1 attached additional pocket
- 1 GLOVE-FIX system
- 2 elastic loops
- Carrying loops on the back


Scope of delivery:
Holster without any other accessories shown


Specifications:
- Colour: yellow
- Size: 19.5 x 14 x 2.5 cm
- Weight: 0.09 kg
- Material: tarpaulin, not flame-retardant